Part Number: MSC1210Y5 Tool/software: Hi
Customer responded that MSC1210Y5 cannot be programmed. Among 1800pcs, 18pcs cannot be programmed.
Do you have any other suggestions?
Part Number: MSC1210Y5 Hi,
Can you please confirm the MSL level for this PN# MSC1210Y5PAGT?
My customer received the parts with 2 different MSL which is 3 and 4.
In fact, the MSL 4 was indicated for this part in TI's website.
The date codes for…
Part Number: MSC1210Y5 I cannot locate a dev board for the MSC1210Y5. Specifically, I need a socket for the MSC1210Y5PAGT (64 pin TQFP). Does anyone know if there is one available?
Part Number: MSC1210Y5 Hello,
We have quite old design with MSC1210Y5 and our application grows up, pushing memory capacity to maximum.
This part is the biggest one of the familly.
Is there an other family with more memory?
Ideally, with compatible…
Part Number: MSC1210Y5 I am writing to inquire if the MSC1210Y5 has recently had any die changes or manufacturing relocation changes. In recent months we have seen an increasing number of failures related to temperature. History has shown us that die…
Part Number: MSC1210Y5 I am using the Brown out reset feature on MSC1210. I understand that there are 4 voltage levels that could be used as a BOR threshold levels (2.5,2.7,4.2,4.7V)
On page 27, in the BOR section, there is a statement that states …
Part Number: MSC1210Y5 We would like to know TI’s recommendations for ceramic resonators. The frequency is 11.0592 MHz. I was wondering whether TI had done any testing with ceramic resonators (at any frequency) and would make any recommendations.
Part Number: MSC1210Y5 Our company used this part in our instruments for more than 10 years without any problem in the past. Recently, at the beginning of 2016, we received a batch of assemblies form the assembly house, which failed 100% when we tried…
Hi guys,
I'm handling the customer return of our product. Usually it is pertaining single or double bit flipped. The most recent one is quite unusual, from the memory dump, the entire code is gone! I'm seeing the entire memory as "0xFF" only.
Is it…
Hi,
Due to some unresolved memory corruption issue and almost till the EOL of the above mentioned part, I would like to look for a newer microcontroller which could replace it. The brief requirements are:
1) The die size should preferablysame or smaller…
