Part Number: MSP-FET Other Parts Discussed in Thread: MSP430F4152 , We earlier have MSP_FET430UIF which woking ok with IAR and MSP430F4152 microcontroller.
Now we have purcheased new MSP-FET but is showing : Fatal error: Failed to set device voltage…
Other Parts Discussed in Thread: MSP430F4152 , OPA317 , OPA330 , XTR117
My MCU is MSP430F4152 current consumption 0.5mA use PWM to Iin RC to Iin use 12K resistance ,But i test IO pin current is 4.12mA i change PWM duty cycle but 4.12 is minimum, i…
Hello,
Sorry I did not get you.Please explain me what do you mean by FW.
First time I use the BLE 5 as well as the IDE.
I am using BLE5 server program on CCSv7,the controller is MSP430F4152, GCC comiler writing on C language.
The program is taken…
Hi GuanTing,
It looks like you may have already found these previous E2E posts with a similar issue, but in case you haven't I have provided them below for your reference:
e2e.ti.com/.../83471
e2e.ti.com/.../58343
e2e.ti.com/.../413651
IAR…
Other Parts Discussed in Thread: MSP430F4152 Hi,
I would like to know the current consumption of charge pump in MSP430F4152. The datasheet mentions the "Average supply current" of the LCD is " 3.8uA ". Can I assume this current doesn't include the current…
Other Parts Discussed in Thread: MSP430F4152 Hi,
Please let me know if there are any register settings in LCD_A registers to blink individual segments in a segment LCD using msp430f4152 controller without using any software logic to flash the segments…
Hi Tom,
MSP430F4152 has TEST / RESET pins, and can be programmed by SBW. Fuse can be blown by SBW too, because VPP is going to device TEST pin. MSP-FET has 2 separated VPP switches (ADG821BR), one for SBW (VF_TEST without any resistor on TEST pin) and…
Part Number: MSP432P401R Other Parts Discussed in Thread: MSP430F4152
Tool/software: TI C/C++ Compiler
Hi,
I coded for MSP432 flash writing with the register level, because we need to use the way for coding.
The address of information memory is…
Other Parts Discussed in Thread: MSP430F4152 Hi everybody,
I use the MSP430F4152 microprocessor and I don't have the solution for the following problem. I have an external 32KHz clock connected only on Xin input of the MSP430. Nothing happens until…
Sorry for the incomplete information. We are using msp-ez430U.
Does EZ430U USB stick supports MSP430g2453 controller? Because there is no issue with msp430F4152 controller.
Regards,
Sowmya
