Other Parts Discussed in Thread: UNIFLASH , MSP430FR2310 , MSP430FR2311 , MSP430FR5962 , MSP430FR5964 , MSP430FR5992 , MSP430FR5994 There is an issue with some of the device support files for MSP430 that will impact some users of UniFlash and CCSv9.1…
Part Number: HDC1080 Other Parts Discussed in Thread: MSP430FR2310 Hello,
I am currently working on a design utilizing an MSP430FR2310 and an HDC1080. This design requires minimal power consumption, and thus will be entering an ultra-low power mode…
Hello Carlos,
Although we do not have a ready made solution as we do for UART-SPI bridge or UART-UART Baud Rate bridge ( e2e.ti.com/.../25-functions-for-25-cents-an-introduction-to-using-mcus-for-simple-function-enhancement ), just about any MSP430…
TI does not have anything like the SC16IS740.
In theory, it would be possible to program a small microcontroller (e.g., MSP430FR2310, MSP430G2153) to do this.
Hi Chuchen,
there are multiple options, all depending on what all should be integrated in the MCU.
As you've mentioned the MSP430G2230 before, I've only looked at parts with a similar configuration but in a 4mm x 4mm package, in case there are more…
Hi Jens,
I'm not an expert on the TPS54201, but it looks like you'll need to be able to generate a PWM signal as input to the device. This is a relatively simple application so I'd recommend a part from our FRAM portfolio . More specifically the MSP430FR2311…
As one more update, you can find the full revision table of compatible hardware and software revisions included in the release notes:
Release-Notes-MSP-GANG.htm
See the section called "Version Matrix"
Hi SeaFesse, If you check the release notes from version 1.2.8.0, in the Version Matrix section, you'll see that the MSP-GANG HW v1.04 is only compatible with version 1.2.1.0 and higher. So this combination should not be used - please use the latest software…
Hi Paul,
I use the MSP430 product selection page from https://www.ti.com/microcontrollers-mcus-processors/msp430-microcontrollers/products.html and save all parts in the spreadsheet. I use the filters to filter out parts. There are quite a few that…
