Search tips
Showing 77 results View by: Thread Post Sort by
    Answered

  • MSPM0G1506: LFOSC Error

    Resolved
    Part Number: MSPM0G1506 Tool/software: Hello, I am considering using the LFOSC on the MSPM0G1506 for a 100ms interval timer. According to the datasheet, LFOSC accuracy is specified as ±3% (−40℃ to 85℃) and ±5% (−40℃ to 125℃. In the worst-case scenario…
    • Resolved
    • Answered

  • MSPM0G1506：MSPM0G150X a series of questions for help

    Resolved
    Part Number: MSPM0G1506 Other Parts Discussed in Thread: MSPM0G1507 Tool/software: Hello, I'm making a 1/4 brick power supply right now, I need a 4×4 size controller, I'm interested in the MSPM0G150X series, I want to know what is the difference between…
    • Resolved

  • MSPM0G1506: LFEXT Clock monitor settings

    Part Number: MSPM0G1506 Other Parts Discussed in Thread: SYSCONFIG Tool/software: Hello, How do I turn off the monitor function of LFEXT Clock? It is set to OFF in sysconfig, but when I look at the LFCLKCFG register it is set to ENABLE. I understand…

  • MSPM0G1506: External oscillator input port

    TI Thinks Resolved
    Part Number: MSPM0G1506 Tool/software: The MSPM0G1X0X has two input ports (LFXIN, LFCLK_IN) for external low-frequency clocks. I would like to input and use a digital signal from an oscillator, but due to the surrounding wiring I would like…
    • Answered

  • MSPM0G1506: About the sampling rate of ADC12 of MSPM0G1506

    Resolved
    Part Number: MSPM0G1506 Hello, my name is Mori. The data sheet says 250ksps with 14bit resolution of ADC12, When you check the Syscfg of adc12_14bit_resolution in the sample code, "Hardware Average Numerator" is 16 and "Desired Sample Time 0" is 62.5ns…
    • Resolved

  • MSPM0G1506: Behavior after BOR Reset

    Part Number: MSPM0G1506 Tool/software: Hello. I have a question about the behavior of the MSPM0G1506 after a BOR reset. I intentionally caused a BOR reset by manipulating the power supply. The BOR level was set to 1, and the power supply was changed…

  • MSPM0G1506: some questions about GPIO at standby mode

    TI Thinks Resolved
    Part Number: MSPM0G1506 Tool/software: Hi team, My customer is evaluating M0G1506. Please help clarify below questions. Thank you. 1. When M0G1506 stay at standby mode, what the GPIO default state ? high-Z or other state ? 2. Before M0G enter standby…

  • MSPM0G1506: How to restrict Flash using SWD settings

    TI Thinks Resolved
    Part Number: MSPM0G1506 Other Parts Discussed in Thread: UNIFLASH Tool/software: Hello. I am considering changing to NONMAIN to change the SWD setting. My goal is to set up Debug with PW I am considering using flashctl_nonmain_memory_write as a reference…

  • MSPM0G1506: When SPI TX FIFO underflow, it will cause receive wrong data?

    Part Number: MSPM0G1506 Tool/software: Hi Team, My customer use M0G1506 as SPI slave, but he don't fill TX FIFO at first transfer. But M0G1507 receive wrong data(check by CRC) , why this happened? In theory, slave can receive right data. …
    • Answered

  • MSPM0G1506: Using BSL with non default UART

    Resolved
    Part Number: MSPM0G1506 Tool/software: Hi, I managed to flash my application via UART BSL on my board with default UART pins (Tx = PA 10, Rx = PA11). (Arrow marks first command from the BSL-Master) But when I try to use my board with non-default…
    • Resolved

Didn't find what you are looking for? Post a new question.