Part Number: OPA857-DIE Other Parts Discussed in Thread: OPA857 Hi,
I want to use OPA857-Die, Could you provide detailed datasheet?
Best regards!
Lemon Shen
Part Number: OPA857-DIE Other Parts Discussed in Thread: OPA857 , , OPA855 , LMH32401 , OPA858 , OPA859 , OPA856 Hello,
I was wondering if there are any experimental/test data about this device?
I would expect the input capacitance to be affected…
Hi Peter,
Here is a link to our optical networking IC's page. https://www.ti.com/interface/optical-networking-ics/products.html
We do have devices like the OPA857-DIE that might work for you and are much simpler than our ONET devices, but the issue…
Part Number: LMH6672 Other Parts Discussed in Thread: OPA857-DIE , OPA657-DIE , OPA2607 , PSPICE-FOR-TI , TINA-TI Hi,
Is there an opamp that cannot source/sink more than 40mA with 3.3V+-5% power supply and small size preferably 2 or 4 circuits in a…
Hello Michel,
If you mean the variation in the parameter for the OPA857-DIE, it would be very similar. There are some certain stresses caused by packaging; however, it would not change this parameter drastically.
Thank you,
Sima
Looking at the DIE datasheet, it looks like there is no bond-wire pad for that pin. Therefore I think it is a safe bet there is no bond wire attachment in the mold compound package either.
https://www.ti.com/lit/ds/symlink/opa857-die.pdf
Thank you for the fast reply Loren.
Our bandwidth is rather low. We are currently using a AD8015 (See attached data sheet) AD8015.pdf and would like to replace it with something similar that is not so close to end of life. We would also like to reduce…
Other Parts Discussed in Thread: OPA857 , OPA855 Hello, can you possibly suggest a suitable operational amplifier for the customer's application as per the below description? ----- We are looking for amplifiers on DIE-level which we can integrate into…
Other Parts Discussed in Thread: OPA857 , LMH6629 i have a photo diode on which a laser of 10ns pulse width and nearly 2ns rise time falls
i have to digitalize the 10ns pulse and measure its pulse width and confirm its pulse width
my application is…
