Part Number: PCM1753-Q1 I want to know the range of the clock of MC pin.
I answered the other threads with 10KHz ~ 1MHz, is that correct?
It's 10 MHz to 1 MHz, but it's not a typo.
Part Number: PCM1753 Other Parts Discussed in Thread: , PCM1754 Hi,
According to PCM1753 data sheet, it seems that PCM1753 can be worked with the default settings normally even if the internal registers aren't access using the ML, MC and MD pins, but…
Part Number: PCM1753-Q1 hello, my customer will use 24kHz sampling frequency, and want to check if 12.288MHz master clock can be used. can you tell me if this is ok?
Part Number: PCM1754-Q1 Other Parts Discussed in Thread: PCM1753-Q1 , , PCM1753 , PCM1754 Hello Team,
I would like to know the difference between PCM1754-Q1 vs PCM1753-Q1.
I know the device comparison table show the difference. But is there any other difference…
Part Number: PCM1780 Other Parts Discussed in Thread: PCM1753 , Hi,
Could you please tell me the difference between PCM1780 and PCM1753? According to both data sheet, tt seems that there is no big difference in electrical characteristics.
Best regards, K…
Part Number: PCM1753 Hi,
The power-on reset timing is mentioned in PCM1753 data sheet as follows. For example, please let me know if you have any advice regarding pop noise such that it is better to apply SCLK to PCM1753 after the power supply has stabilized…
Part Number: PCM1753
Hi,
Is my understanding correct that PCM1753 perform the dc offset calibration for the outputs of VOUTL and VOUTR during the reset period(1024 system clocks)?
It seems that the dc offset is cancelled when observing VOUTL and VOUTR…
Part Number: PCM1753 Hi,
Could you please tell me the root cause and workaround regarding the pop noise issue during power-up? I found the link of the FAQ in the following post, but the link has already been lost.
PCM1754DBQR questions about POP noise…