Part Number: PCM4202 Tool/software: Hello,
For the part number PCM4202DBR, referring to Figure 16 in datasheet, clarification required on LRCK and BCK clock assertion timings.
The LRCK changing position and BCK changing position have some skewed…
Part Number: PCM4202 Other Parts Discussed in Thread: TAA5242 Tool/software: Hello,
In ADC part PCM4202DBR, there is a left channel and right channel.
1. what is mean by left and right channel in 24 bit ADC.
2. Is it mandatory to use both channels…
Part Number: PCM4202 Tool/software: Hello,
For ADC part PCM4202DBR, is configured in slave mode where the PCM bit and left/right clocks (BCK and LRCK) are configured as input pins. Referring to Figure 6 in the datasheet, the time period for LRCK clock…
Part Number: PCM4202 Other Parts Discussed in Thread: TLV320ADC5120 , TAA5212
Tool/software:
Hi expert,
We would like to set the PCM4202 to PCM slave Mode, Quad Rate and operate the Sampling Rates at 210.9kHz. In this case, tLRCKP=4.748us(=1/210…
Part Number: PCM4202 Other Parts Discussed in Thread: PCM4220 I observe a dual tone output from the PCM4202. Amplitudes are nearly equal around -80dB . Frequencies are approximately 1.45KHz and 1.5KHz and drift a bit with temperature.
The Master clock…
Part Number: PCM4202 Hello, My customer would like to know PCM4202DBR thermal information, Tj(max) and thermal resistances like θja,θjc,θJb, ψjt, ψjb. Best regards, K.Hirano
Part Number: PCM4202PCM4202 works in the PCM Slave Mode Operation or PCM master Mode Operation . I found that quad Rate Mode (LRCK=200KHz,SCKI= 128FS,BCK= 64FS) had high noise, while other modes had low noise.Figure 1 shows the corresponding FFT diagram…
Part Number: PCM4202 Other Parts Discussed in Thread: OPA1637 , Could I please get some review comments on the attached PCM4202 + OPA1637 schematic snippet?
Thanks!
