Hi,
If SCK is not supplied externally, the device must use the internal PLL to generate a high-frequency clock internally to drive the delta-sigma modulator and the DSP. The is PLL must be sourced from the BCK or another external clock input (GPIO pin…
Part Number: PCM5141 Other Parts Discussed in Thread: PCM5142 Hi All,
we have quesitons about PCM5141 GUI and memory.
1. The default value of “ cycles” in GUI source is 0x388, in which cases the “cycles” will be changed, and which range of the “cycles…
Part Number: PCM5141
Hi Team,
The customer is using PCM5141. The customer uses 1400 PCM5141 devices. But 11 devices are no sound and one device cannot
be adjusted the volume.
The attache is the customer's schematic.
Q1: Is the customer's schematic…
Part Number: PCM5141 Hi Team,
My customer can adjust PCM5141 DAC volume by configuring Page 0 register 60,61,62. Meanwhile, they want to adjust the volume of Digital output.
May I know the control flow of volume control for digital output?
Part Number: PCM5141 I want to make an audio energy detector, and output the H or L level voltage. Can I use miniDSP to achieve it?
I have test the peak detector component --> GPIO_OUT , but it doesn't work. And it can not confirm the threshold level…
Other Parts Discussed in Thread: PCM5142 , PCM5141 Hi Matt, I see the original thread has been closed related to PCM5142/5141. I would like to continue with some more questions in relation to this.... We are having problems with the PCM5141 and 96khz…
Other Parts Discussed in Thread: PCM5141 , PCM5142 , PCM5102A Hi,
Could you please tell us about the power dissipation of data sheet? We found that there is described the power dissipation on page 12 of PCM5141/PCM5142 data sheet. Does this parameter…
Other Parts Discussed in Thread: PCM5142 Hi,
I am trying to configure PCM5142 to a sample rate of 8kHz. My system supplies the PCM5142 with an 8MHz clock at SCK input pin. The datasheet says: " SCK rates that are not common to standard audio clocks…
Part Number: PCM5142EVM-U Other Parts Discussed in Thread: SRC4392 , PCM5141 , PCM5142 Hi team，
I am testing PCM5142EVM-U for customer. I used USB input because I don't have SPDIF source in our lab.
I configured EVM based on this thread: https:…
