Part Number: DRV8889-Q1 Tool/software: Dear team,
Would you please help me to understand below queries?
1. I learned we need to change STALL_TH when we change the motor speed. In general, which should it be changed to increase or decrease the STALL_TH…
Alternatively, you could also try enabling the dynamic test case by commenting out the "ti,pps" static mapping in the DTS and running the same testptp sequence with the-i and -e options as before.
After a quick test on my SK-AM62x board, it appears…
Mahesh,
Just verified. You made a mistake and did not follow the second step correctly:
"2 ) Configure ports to have the same MAC address"
am57xx-evm login:
am57xx-evm login: root
root@am57xx-evm:~# ifconfig eth4
eth4: flags=4099<UP,BROADCAST…
Part Number: TMDS64EVM Tool/software: Hello,
I'm trying to get an PPS output synchronized with PTP.
I will detail how I get my PPS signal:
I use a National Instrument platform that works as a PTP grandmaster. I can get the PPS signal from the…
Hi Oleg,
I'm not sure why the Active RDO register is zeroing out bits 31:0 in your system.
As mentioned earlier, the object in the RDO register is an RDO, not a PDO, and they have slightly different formats.
I have been testing sink PPS on an EVM…
Hi Pratham,
See the following thread on the hardware modifications needed to support 1S with the CHG-EVM.
The USBCPD Application Customization Tool is used to generate a .json configuration based on your design requirements (including PPS) for the…
Hello Jaison, For 1 PPS inputs we do not recommend using the LMK05028 DPLL. The part cannot compensate for noise on the input reference which will cause locking issues. For using Zero Delay Mode with a 1 PPS input to generate 10MHz outputs I would recommend…
Hello,
Kyohei said: When replacing the battery charger in the diagram below with a programmable DC-DC converter, can the device enable PPS as PD3.1?
No. At this time the only the I2C event table only supports these devices:
Kyohei said: In that…
