Search tips
Showing 11,571 results View by: Thread Post Sort by

  • LMX2572: Frequency range of the reference clock and RF power needed from that clock.

    TI Thinks Resolved
    Part Number: LMX2572 Hi Team, A customer wants to know the frequency range of the reference clock of LMX2572 and the RF power needed from that clock. The FOSCin from the datasheet are 5MHz-250MHz and 5MHz-125MHz with and without doubler. Is this the…

  • CC2500: Extending Range and support regarding RF Front End Chip with TI transceiver IC

    Part Number: CC2500 Other Parts Discussed in Thread: CC1120 , CC1190 we are planning to develop Drone Remote controller, for that we are interested in Texas Instruments CC2500 RF Transceiver module + Skyworks RF Front End (PA + LNA (2-2.5 Noise figure…

  • CC8531: CC8531 communication range and RF interference issues

    TI Thinks Resolved
    Part Number: CC8531 Other Parts Discussed in Thread: CC2590 Hi TI Team, We are designing a wireless microphone product using CC8531+CC2590 respectively . Our solution (running at autonomous mode) manages to achieve a communication distance over 250M…

  • CCS/IWR1642: How to make a long range radar using short range radar demo and how to use visualizer and estimator?

    TI Thinks Resolved
    Part Number: IWR1642 Tool/software: Code Composer Studio How to make a long range radar using short range radar demo of IWR1642 and how to see that on GUI?
    • Answered

  • AWR1443BOOST: Radar Range calculation in mmWavesensing Estimator

    Resolved
    Part Number: AWR1443BOOST Other Parts Discussed in Thread: AWR1443 , AWR1243 Hi, Appreciate if you could explain below from range equation got from sensing estimator tool at TI web max_range_for_typical_detectable_object is given as Math.sqrt(Math…
    • Resolved
    • Answered

  • CCS/LAUNCHXL-CC13-90: Range extender RF power settings issues

    Resolved
    Part Number: LAUNCHXL-CC13-90 Other Parts Discussed in Thread: CC1310 , SIMPLELINK-CC13X0-SDK Tool/software: Code Composer Studio I used the cc13-90us launchPad board to set 25db tx output, but it is lower than cc1310 launchPad(14db default setting, without…
    • Resolved
    • Answered

  • MMWCAS-RF-EVM: Adc value wrong if increase azimuth range or decrease degree slice in txbf studio demo

    Resolved
    Part Number: MMWCAS-RF-EVM The default scan range is [-15:1:15] in "cascade_TxBF_dataCapture.m" txbf studio demo. If I increase azimuth range or decrease degree slice, the added part of adc values are wrong. For example, I changed to [-20:1:20]. Then…
    • Resolved

  • RE: CC1312PSIP: Increase range

    Hi Andy, The narrower the Receiver bandwidth (RXBW), the narrower the noise bandwidth. So, reducing the datarate (and consequently using a more narrow deviation) will allow the use of a more narrow RXBW, increasing the potential range. Using a 20kbps…
    • Answered

  • RE: CC1312R: 5KBPS OAD function and high packet loss rate when issuing commands

    Resolved
    Hi faker, The range estimator provides an estimate for the range of different Phys and the second page of the excel workbook provides a Range Debug Check list. Please go through it for range concerns and tips. https://www.ti.com/tool/RF-RANGE-ESTIMATOR…

  • CC1101: RF chip (CC1101) with Blind area in Receiving range less than 5m

    TI Thinks Resolved
    Part Number: CC1101 in our recent production (Alarm Clock Receiver), we found many RF chips CC1101 with a serious defect (there is a Receiving Blind area in receiving range less than 5m) , the defect rate is near to 8%, in this Blind area, the receiver…

Didn't find what you are looking for? Post a new question.