Part Number: AM62P Hello TI team,
I am working with the AM62P device and would like to clarify the expected power consumption in low-power modes, specifically Suspend-to-RAM (Deep Sleep) .
From the available documentation (datasheet, TRM, and SDK…
Hi,
A1 & A2: the 315 MHz ref design should be fine at 335 MHz so this is not a RF matching issue.
A3. The chip has been tested at 315 MHz and the VCO and PLL can handle 300 MHz to 348 MHz range.
A4. Double check section 21 and section 22 in the…
Hi Dmitry,
Dmitry Trots said: We have supposed that time budget for HWA will be 11us. Is this true?
Can you share the configuration that you are using? Can you also mention the SDK version that you are using?
There is an error in the timing mentioned…
Part Number: CC1312R Hello Texas Instruments Team,
I hope you are doing well.
I am currently evaluating RF IC/MCU's for a project. I came across the CC1312R device, and I have a specific use case that I would like to confirm.
I am looking for a…
Dear Hruday,
Thank you for your reply.
Please find the details of our application below for your review and suggestions:
We are using 20 MHz Wi-Fi (802.11n) at 2.4 GHz RF.
The RF power at the power detector input will be in the range of…
Part Number: CC2340R5 Hello,
I’m working on a CC2340RD MCU board and using the inverted-F antenna from the reference design. I’ve been tuning the antenna using a NanoVNA , and here’s my setup:
Antenna feed-point matching network tuned to 2.4 GHz…
Part Number: AWR2944EVM Hello Software App team,
I'm using AWR2944EVM for one of my projects. As I see, there is no option in the (Sensing estimator) tool to configure AWR2944EVM parameters, and for that, I created a thread also, and a TI expert told…
Part Number: CS-AMPLIFIER-ERROR-TOOL
Hi TI Team,
First, I would like to thank you for providing the Current Sense Amplifier Comparison and Error Tool. It is very useful for quickly comparing devices and estimating the overall error contribution of…
Hi Ryan,
There are two types of calibrations performed before the sensor gets deployed in the field.
1. RF front end calibrations (also referred as factory calibrations)
2. Range bias and phase offset calibration (also referred as bore-sight calibration…