Part Number: TINA-TI I am designing a RF amplifying circuit whose frequency range is 20MhZ ~ 500Mhz and hope to use TINA to simulate the circuit , as well as not sure whether the TINA can simulate the RF circuit, please advise.
thanks,
John
Part Number: LP-CC1352P7 Other Parts Discussed in Thread: SYSCONFIG Is there a unique PHY setting for using the upper end of the 902-928 MHz range? Mine seems to be falling apart > 920 MHz. I've attached SA traces of 919 MHz and 923 MHz I tried 2 custom…
Part Number: CC2650 Ti engineer，
In my experiment, I need two pairs of CC2650 boards to send and receive messages at the same time, so I want them to work in channels that do not interfere with each other. But I don’t seem to find relevant information…
Part Number: CC1352P7 Other Parts Discussed in Thread: CC2590 Hi, my name is Matias Lao. Since the integrated PA amplifier can not be used on the 2.4 GHz band for the CC1352P7, we are planning to modify the RF front end by adding a range extender.
We…
Part Number: LMX2594EVM Other Parts Discussed in Thread: LMX2594 Hi,
For my application I have to generate frequency range from 10.95GHz to 15GHz with 7dBm of power using LMX2594EVM board but the frequency is generated with low power as below 0dBm and…
Part Number: CC1352P Hi,
I have a cc1352p launchpad and would like to test the RF range(I am new to this). Please assist me with providing Tx and Rx code links, as well as which IDE I may use to programming the launchpad.
Part Number: AWR2944 Hi, we would like to customize the antenna 4TX 4RX using AWR2944 (more power, and more LNA), we would like to capture RAW LVDS data from AWR2944 in DDMA mode. How could we implement our own range, speed, DOA estimation algorithm using…
Part Number: SN74AHCT1G125-Q1 Hi,
I plan to design with SN74AHCT1G125-Q1 in a Vcc = 3.3V application.
However, i can only find the VIH/VIL spec under Vcc = 3V and 4.5V - 5.5V condition in the datasheet.
Could you let me know how to estimate the…
Part Number: CC1120 Hi, this tool is very helpful.
But I ask myself what is meant in "Effective attentuation between RX and TX: with guard band / without guard band". The difference is 20dB in 'Pracitical sensivity level'...
thx!
Part Number: IWR6843AOPEVM Hello,
In the Demo Visualizer 2.1, when I set the desired configuration with the "RCS" of my target, "Desirable configuration", etc. the plateform give me a estimation of maximum range for the desired RCS. Can I have the formula…
