Dear Joshua,
Thank you very much for your clarification.
Currently, LMR51406 is not available in WEBENCH, so we used LMR51410X as a substitute device for our evaluation. In this case, does it mean that WEBENCH cannot properly reflect the difference…
Thank you for the response Sir!
I would like to know how do I access the thermal noise then?
The scenario is slightly different from a typical automotive one. I am detecting the presence and range of a concrete wall at a distance of say 10 m. Given…
Part Number: PCM1798 Other Parts Discussed in Thread: PCM5102A , PCM1789 Hi team,
Background: We are evaluating PCM1798DBR for an audio design. The target is to reduce power-supply cost by using a single 9-V supply for the external I/V amplifier,…
Part Number: RF-FILTER-CALC Tool/software: Hi team,
I’m Sanjana from Quantum Circuits, Inc. We’re designing an RF front end using connectorized components and are looking for filter options that will work in our operating range. I reviewed the connectorized…
Thank you so much.
If the object is moving but no need of velocity estimation, in this case
to reduce computation time, whether we can skip doppler FFT and go with
range and angle FFT.
Whether the velocity of the object which creates doppler shift…
EP and analog devices are characterized differently. The 1.8V +/-5% is an SoC spec range that comes from the VPP IP. Based on this, we choose LDOs that can maintain the voltage within spec taking into account the voltage accuracy, ripple, noise, transient…
Hi Swarnendu,
I understand, testing is done in anechoic chamber. I am looking for the details of anechoic chamber like size of chamber, types of RF absorbers used in chamber, frequency range, Shielding Effectiveness of these RF absorbers, distance between…
Part Number: OPA858 Other Parts Discussed in Thread: TINA-TI Hello,
We are currently evaluating the output noise performance of a TIA circuit based on OPA858 . During our measurements, we observed that the measured output noise spectrum does not match…
Hello Josh, Many thanks for your feedback. If I use numloops = 2, how does it work?
I did use single RX, single TX, and estimated only the range on the HWA by downchirp.
Does it work like this?
HWA processing time = ~ 137.61 μs. Is Chirp's processing…
Part Number: CC2652R7 Other Parts Discussed in Thread: CC2652R Hi team,
We would like to use CC2652R to develop for 2.4GHz Zigbee remote controller with range extender SE2436L-R. We need high output power and good LNA gain. Could you please give the…