Part Number: SN65LVDS108 Tool/software: Hello,
I would like to know what the junction temperature limit is for this part. The spec I was able to find online: https://www.ti.com/general/docs/suppproductinfo.tsp?distId=10&gotoUrl=https%3A%2F%2Fwww.ti.com…
I noticed that the R_junction-to-ambient you have given assumes a high-k. What is the difference between high-k and low-k?
I got the value of 98.4[K/W] from page 3 of the part spec from the TI website: www.ti.com/.../sn65lvds108
Part Number: SN65LVDS108 Other Parts Discussed in Thread: SN65LVDS1050 Hello guys,
One of my customers is considering using SN65LVDS108 for their new products.
At this moment, they have the following question. Could you please give me your reply?
Q. Is…
Part Number: SN65LVDS108 Hi,
Good Day. Can customer use SN65LVDS108 in a flying object with 30k ft. altitude specs? Thank you very much.
Best Regards,
Ray Vincent
Part Number: SN65LVDS108 Other Parts Discussed in Thread: LMK01010 , CDCLVD1208 , LMK00308 Hi team,
I'm going to run 100MHz clock signal for reference of FPGA DDR4 (LVDS in, LVDS out). I'm looking into clock buffer devices ( LMK01010, LMK00308,…
Part Number: SN65LVDS108 I've been trying to find out the exact ESD values for this device. The datasheet says the following:
Electrostatic discharge, A, B, Y, Z, and GND(3) Class 3, A:12 kV, B: 500 V
What about the other inputs (enable and such)…
Other Parts Discussed in Thread: SN65LVDS108 If SN65LVDS108 is not use 8ch output (ex. 5ch output and 3ch unused), unused output connect open.
Is it no problem?
Best regards,
Satoshi
Hi Michael,
1. There's no special naming convention related to TIA/EIA-644-A and TIA/EIA-644 standard.
2. If the device is a receiver, LV means there's no integrated termination resistor while LT means there is an integrated termination resistor.…
Other Parts Discussed in Thread: DS90LV001 , DS25BR150 , DS25BR204 , SN65LVDS108 Hi team,
I'm looking for a 1:N fanout solution for LVDS and CML like below DS90LV001. It needs to be up to 3Gbps. I'm looking at DS25BR150, but it has internal termination that…
Hi Mickey,
Here are a few suggestions that fit your criteria, listed with best additive jitter performance first:
1. LMK01010
-1:8 LVDS out, 1600MHz max
-30fs additive jitter
-Individual output enable via register programming
2. CDCUN1208LP
-1:8 LVDS…
