Part Number: SN74ALS541 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of SN74ALS541NSR…
Part Number: SN74ALS541 When 74ALS541 is not powered, can applying 3.4V (less than absolute maximum ratings) to the output pin, will this cause any damage to this device?
Other Parts Discussed in Thread: SN74LVC8T245 , SN74ALS541 Hello,
We need to connect the output of SN74LVC8T245 to the input of SN74ALS541 in our design. Do we need any weak pullup for the input of SN74ALS541?
Best regards,
Mark
Hi,
Please let me ask about abs max voltage for negative voltage. There is no information due to legacy part but I believe that these pins should have ESD protection diode and so it should be around -0.3V.
Best Regards,
Sonoki
Other Parts Discussed in Thread: SN74ALS541 Hello,
In Fig 1 Load Circuits and Voltage Waveforms on page 5 of the datasheet (SDAS025D, April 1982 - Revised March 2002), there are three load circuts: 1) RL from output to GND, 2) RL from output to Vcc…
Other Parts Discussed in Thread: SN74ALS541-1 Hi,
Please let me ask about recommended low-level output current for SN74ALS541-1. Does it mean the maximum current for per channel or total current of all channel? I believe that this should be total current…
I am trying to simulate a circuit using one of TI components (SN74ALS541N), and the file I found in the webpage referred to this component ( https://www.ti.com/product/SN74ALS541 ) is a ".cir" file. However I use Fusion 360 for simulation, and this type…
Hi Hirotaka -san,
There are minor differences of SN74ALS541 compared to SN74LS541 device as shown here in the comparison table.
The die on both are different and use no grading at production .
