Answered

• SN74AXC2T45-Q1: Need SN74AXC2T45-Q1's 1.2V IBIS model.

  

  Leo Ma

  Resolved

  Part Number: SN74AXC2T45-Q1 Other Parts Discussed in Thread: SN74AXC2T45 , SN74AVC4T774 Tool/software: Hi Expert, Have a good day! Do you have SN74AXC2T45(-Q1)’s 1.2V IBIS model? Best Wishes, Leo

  • Resolved

  • 8 months ago
  • Logic
  • Logic forum

• RE: TPS3851: Inquiry About WDI pin leakage current for TPS3851G33EDRBR

  

  chunli Liang

  Hi Jesse Thank you for your quick answer. In fact, I want to use SN74AXC2T45QDCURQ1 in my design. The maximum output current (IOH) of SN74AXC2T45QDCURQ1 is 50mA. Because the current consumed by the TPS3851G33EDRBR's WDI pin is in the few nanoamp…

  • 2 months ago
  • Interface
  • Interface forum
Answered

• SN74AXC2T245-Q1: Voltage Translation Data Rate (+1.2V to +0.9V)

  

  David Dominguez

  Resolved

  Part Number: SN74AXC2T245-Q1 Other Parts Discussed in Thread: SN74AXC2T45-Q1 I'm using the SN74AXC2T45-Q1 to translate from +1.2V to +0.9V (B to A direction) and I would like to operate at 125 Mbps. I have been able to operate at 25 Mbps. For the +1.2V…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• RE: AM6411: Request for Alternative Parts for SN74AVC2T244DQMR on JTAG circuit

  

  Michael Ikwuyum

  Resolved

  Hi Jihoon, You may also see SN74AXC2T45-Q1, thanks. Best Regards, Michael.

  • over 1 year ago
  • Processors
  • Processors forum
Answered

• [FAQ] Are there voltage level translation / level shifter device recommendations for the industry standard interfaces like GPIO, SPI, UART, I2C, MDIO, RGMII, I2S etc?

  

  ShreyasRao

  Resolved

  FAQ: Logic and Voltage Translation > Voltage Translators >> Current FAQ Here are the voltage level translation device recommendations for various industry standard interfaces: Interface Recommended Device 3.6V Maximum 5.5V Maximum…

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum
Answered

• RE: SN74LXC2T45-Q1: Output rise and fall times

  

  Clemens Ladisch

  Resolved

  See [FAQ] What is the output transition rate for a logic device? Why are you referring a -Q1 device? Do you need automotive qualification? At 1.8 V, the SN74AXC2T45 has the most drive strength. Auto-direction sensing is not possible for a buffer.

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• TDA4VE-Q1: TDA4VE-Q1 IO voltage Question

  

  rocky rocky

  Resolved

  Part Number: TDA4VE-Q1 Other Parts Discussed in Thread: SN74AXC2T45 hi, all: could you tell me how to set TDA4VE -- SERDES0xxxx/PCIE_REFCLK IO voltage? I want to set those pins voltage is 3.3V, because my computer is 3.3V. can I set some register…

  • Resolved

  • over 2 years ago
  • Processors
  • Processors forum
Answered

• SN74AXC2T245-Q1: 1.8V I/O model not found in IBIS model

  

  Sreelekshmi Unnithan

  Resolved

  Part Number: SN74AXC2T245-Q1 Other Parts Discussed in Thread: SN74AXC2T245 Hi, We are using CAXC2T245QRSWRQ1 in our design for level shifting of voltage from +3.3V to +1.8V. We need to perform SI analysis. The models found in sn74axc2t245.ibs are…

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AXC2T45: Single power supply

  

  Ryo Akashi

  Resolved

  Part Number: SN74AXC2T45 Other Parts Discussed in Thread: SN74AXC1T45 Hello experts, I have two question about SN74AXCxT45. 1. Is it possible to apply same voltage for Vcca and Vccb? In datasheet, there is description in below. For example…

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• LSF0102: Two Level Shift in Series

  

  Jim CHEN

  Resolved

  Part Number: LSF0102 Other Parts Discussed in Thread: SN74AXC2T45 , SN74AVC2T245 , SN74AXC2T245-Q1 Dear Team, My customer has one application that require transfer the signal from 3.3V to 1.8V and then transfer from 1.8V back to 3.3V. Could they put…

  • Resolved

  • over 5 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.