Part Number: SN74CB3T3245 hi All
SN74CB3T3245：The output level is higher than the supply voltage
We are replacing PI3C3245 with SN74CB3T3245. In the case of VCC 2.5V power supply, the signal level on the A side is 3.3V, and the signal level on the B side…
Part Number: SN74CB3T3245 I hope all is well!
I'm trying to simulate the SN74CB3T3245PW IBIS model but it is having some issues, please see below:
I seem to be running into a problem with the SN74CB3T3245PW IBIS model (your scdm055.ibs dated July 30…
Part Number: SN74CB3T3245 Hello,
I use the SN74CB3T3245PW in my design for Level shifting LVCMOS signals from 3.3v to 2.5v level.
Since I thought this device acts as a driver which gets on the "Left" side (defined as Bus controller in datasheet) 3.3v…
Part Number: SN74CB3T3245 Hi Team,
Our customer configured the SN74CB3T3245 as follows:
VCC=3.3V. The B1-B8 signals are driven by a FPGA (LVCMOS 3.3V). The signals A1-A8 have 10K pull-downs. The readings on A1-A8 are 2.1V instead of the expected 3.3V. …
When looking for a multiplexer to be implemented for hot-insertion (also known as hot-swapping) applications. It is important to make sure it has Ioff Circuitry and the Partial Power Down Mode feature. We also recommend to pick a multiplexer with a continuous…
Ohad,
The values you are referencing are the test conditions that were used to measure the on-state resistance. These measurements are taken one channel at a time so the current value is per channel. The on-state resistance is measured by forcing a known…
Part Number: SN74CB3T3245 Hi Sirs,
Sorry to bother you.
As title, please help provide SN74CB3T3245DBQR θJA(℃/W) and θJC (℃/W) information for us.
Thanks!!
