Part Number: SN74HC132 Dear Specialists,
My customer wants to know FIT rate at 70% confidence level.
Could you please let us know how to calculate.
---Question
It is necessary to calculate the failure rate value when the reliability level is 70…
Part Number: SN74HC132 We have the 74HC132 configured as two S-R Flip-Flop circuits on Board A. The outputs are connected through a pluggable ribbon cable to a M74HC4051TTR Mux Inputs with a 100K pull-up resistor to 3.3V on Board B. Board B generates…
Part Number: SN74HC132 Dear Sir or Madam,
I am writing to know the terminal finish of the part SN74HC132D if it is NiPdAu or NiAu or Au. Please could you tell me the thickness of Au.
In addition, could you inform me about Moisture Sensitivity…
Part Number: SN74HC132 Hi Team,
Could you help to confirm the differences between these two devices. SN74AHC1 32PWR but we had spec'd it as SN74HC1 32PWR
Can you determine if the internal die is different between the two SN74AHC132PWR and SN74HC132PWR…
Part Number: SN74HC132 Other Parts Discussed in Thread: SN74HCS00 Hello Guys,
Good day.
Our customer is using the SN74HC123 in the fan tach monitoring application. His fan tach is using 12V and the SN74HC123 is a 5V device. Is the input clamped…
Part Number: SN74HCS00-Q1 Hello Logic team,
What exactly is the difference between two Logic Families SN74HC S00 & SN74HC 132 ?
From datasheets, both parts look similar except minor differences in electrical parameters (like Supply current, ESD…
Part Number: SN74HC132
Hi, I am trying to use the following schematic. Could you tell me the input current and the current consumption of SN74HC132?. And Please point out if there is a possibility of latch-up. There was no mention of the Latch-Up Performance…
Part Number: SN74HC132 Hello, our customer received 1000 pieces P/N: SN74HC132N with Date Code 1816 from us, but claims the coloring of the leads and solderability:
-----
SaNu the pins are "tapped" (surface brown to black-brown).
The solderability…
Hi Michael,
I explain you about a pull down resistor.
In the circuit there are a SVS (tcl7705_ep) and a Nand gate (sn74hc132_q1), the output of SVS (reset signal) is connected to the an input pin of Nand gate and at this input there is a pull down resistor…
