Part Number: SN74LV1T00 For the schematic safety analysis I want to discuss situation when 5V supplied SN74LV1T00DBVR output connected to the ground over 22 Ohm resistor.
In this situation output current exceed 25 mA Absolute Maximum output current…
Part Number: SN74LV1T00 Other Parts Discussed in Thread: TXU0101 , SN74LXC1T45 Hi Team,
My customer are using LT +LOGIC GATES packaged parts for gated+ level shifting
their input logics are in 1.8V and 3.3V o/p logic has to be in 5v
They provided…
Part Number: SN74LV1T00-Q1 If a level shift of 1.8V to 5V is needed, do I need to go through two 74LV1T00 gates? For example 1.8V to 3.3V using a Vcc of 3.3 V on gate 1, then 3.3V to 5V using a Vcc of 5V on gate 2? Or can it be done with one gate using…
Part Number: SN74LVC1G00 Other Parts Discussed in Thread: SN74LVC1G17 , SN74AUP1T00 , SN74LV1T00 Tool/software: Hi,
we are survey n-and gate ， supply voltage as below, we have choosing SN74LVC1G00 but seem 1.8Vin can't higher than SN74LVC1G00 VIH=2V…
Part Number: LM339 Other Parts Discussed in Thread: TLV3601 , TLV3801 , SN74LV1T00 , SN74AUP1T57 , SN74AUP1T34 , TLV3603 , SN74LVC1GU04 Tool/software: Hello, TI experts,
currently looking for a very high speed(>200MHz) sonusoid to square waveform signal…
There is no logic device that has a guaranteed threshold that low at V CC = 3.3 V. (Did you actually mean V CC with "Vin"?)
Devices in the LV1T family might be able to do what you want, but they have only a single gate (e.g., SN74LV1T00).
Devices…
These input thresholds require voltage-shifting gates in the LV1T or AUP1T families. There is no single-input buffer, but you can use AND, OR, or configurable gates: SN74LV1T08/32, SN74AUP1T08/32, SN74AUP1T57/58/97/98/157/158.
The output voltages…
Quickly find solutions to common questions about voltage translation (level shifter) devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… …
Auto-Bidirectional Level-Shifters
Fixed DIR / DIR…
