Part Number: SN74LVC1G86 Hello,
One of our suppliers used the SN74LVC1G86 circuit in a build, and we are looking to determine whether it meets our jitter requirements. We would like to know how much RMS jitter the SN74LVC1G86 circuit will add to the…
Part Number: SN74LVC1G86 Hi Team,
Regarding product SN74LVC1G86DCKT, what is the input voltage considered high level when VCC is 2.5V? The current measured voltage is 1.2V, but the specification is written as 1.7V
Part Number: SN74LVC1G86-Q1 We are currently performing an FMEDA for our VCU project. To complete our analysis, we urgently require the following information:
FIT (Failures‑In‑Time)
data Failure mode distribution / percentage breakdown
This…
Part Number: SN74LVC1G86 Other Parts Discussed in Thread: SN74AUP1G58 , SN74LVC1G32 The GND current for these tiny logic parts is +-10uA and that is very high.
what is the pin to pin compatible and same pkg but lowwe GND current:
SN74LVC1G86DRLR…
Part Number: SN74LVC1G86 Other Parts Discussed in Thread: TINA-TI Hi,
May I know how do I get unencrypted PSpice for SN74LVC1G86 on Simetrix?
Thanks,
Christina
Part Number: SN74LVC1G86 Hi Texas
I have a component With Top marking C86J. I don't find any information aboute the J in Your data sheets.
Do I have a correct part?
Regards
Ronny
Hi Kunal,
No, the internal logic will not change because of the removal of an external supply filter capacitor, however the output will likely have more noise. In most cases, this will not cause any issues.
The bypass capacitor has two primary purposes…
