• SN74LVC2G02: |tPLH-tPHL| question

  

  Lillian Liu(SH)

  TI Thinks Resolved

  Part Number: SN74LVC2G02 Tool/software: HI team, Sercomm want to use a NOR gate chip as an inverter, requiring a higher data rate and a smaller |tPLH-tPHL|. We have initially selected the chip model: sn74lvc2g02. We have the following questions…

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN74LVC2G02-EP: Thermal Resistance

  

  Jejomar Ildefonso

  Resolved

  Part Number: SN74LVC2G02-EP Other Parts Discussed in Thread: SN74LVC07A-EP , Hi Team, Can we ask for the junction-to-case and junction-to-board thermal resistance value of SN74LVC2G02-EP and SN74LVC07A-EP? Thanks in advance! Kind Regards, Jej…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum

• SN74LVC2G02: VOH,VOL

  

  Yuto Sakai

  TI Thinks Resolved

  Part Number: SN74LVC2G02 Hi, Could you tell me about the specifications of VOH, VOL? What is the variation of VOH and VOL when VCC is 3V? Best regards, Yuto Sakai

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• RE: SN74LVC2G02: 74LVC2G02

  

  Emrys Maier

  Resolved

  Hi Jani, Yes, this is expected behavior from CMOS devices. The SN74LVC2G02 is specified to operate with the inputs at a static value of Vcc or GND (which is where the 300nA of static current is measured), but in an oscillator, the input is generally…

  • over 7 years ago
  • Logic
  • Logic forum

• SN74LVC2G02

  

  eli

  Other Parts Discussed in Thread: SN74LVC2G02 In SN74LVC2G02, if the VCC = 4.0V, what is the absolute maximum voltage on inputs?

  • over 10 years ago
  • Logic
  • Logic forum

• SN74LVC2G02 power-up behaviour

  

  Erik Boogh

  My application requires that the output of the NOR gate will not exceed 1V during power-up. The output is pulled-down to GND (R=200kOhm) Inputs during power-up: Input 1 is pulled-up to VCC (R=5kOhm) Input 2 can be low or high (undefined, but not floating…

  • over 12 years ago
  • Logic
  • Logic forum

• CD4013B: Faster SR latch with non-inverted and inverted output

  

  HSIN-CHE HSIEH

  TI Thinks Resolved

  Part Number: CD4013B Other Parts Discussed in Thread: SN74LS279A , , SN74LS74A , SN74LVC2G02 Tool/software: I am looking for an SR latch with non-inverting inputs (set, reset) and both inverted and non-inverted outputs available. CD4013B meets my requirement…

  • 3 months ago
  • Logic
  • Logic forum

• TLV9021-Q1: Latching amplitude of input signal

  

  Dierk Bronner

  TI Thinks Resolved

  Part Number: TLV9021-Q1 Other Parts Discussed in Thread: CD4044B , CD4043B , SN74LVC2G02 , SN74LVC2G00 Tool/software: Hello, my customer is looking for a smart way to latch the amplitude of an input signal and compare the amplitude against a reference…

  • 8 months ago
  • Amplifiers
  • Amplifiers forum

• SN74LVC1G175: Regarding the initial state of the Flip Flop

  

  Alan Varghese

  TI Thinks Resolved

  Part Number: SN74LVC1G175 Other Parts Discussed in Thread: SN74LVC2G02 , SN74LVC2G132 Tool/software: Hi team, We are using SN74LVC1G175DCKR for our over temperature protection circuit. We have a heating coil, when the temperature of the heating coil…

  • 6 months ago
  • Logic
  • Logic forum
Answered

• SN74HCS09: Please recommend a suitable IC

  

  Charlie Xiao

  Resolved

  Part Number: SN74HCS09 Other Parts Discussed in Thread: CD4043B , SN74LVC2G02 Hi， Please help to recommend a logic gate device that meets the following requirements. It is also acceptable to meet the requirements with a combination of multiple logic…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.