Part Number: SN74LVC3G06 Tool/software: Hi,
I am testing SN74LVC3G06DCTR and found that its output is incorrect.
I supplied the IC with 3.3V from a benchtop power supply and connected pin 4 (GND) and pin 1(1A) to the ground. I leave the output 1Y…
Part Number: SN74LVC3G06 Hello-
The datasheet diagram shows pins 1-8 and the mechanical drawing shows pins A1, A2, etc. I need to know the pin assignments for the A1, A2, etc. pin numbering.
Thanks for your help
Part Number: SN74LVC3G06 Hello,
We try to invert a 5V 30kHz Arduino signal with the SN74LVC3G06 to drive afterwards to drive an inverter afterwards. Unfortunately, we do not get the desired output, we expect the inverted signal of the input signal…
Part Number: SN74LVC3G06 Hi Team,
My customer is looking for the theta JC and JB for SN74LVC3G06DCUR, can you share these values?
Looking forward to your inputs.
Regards, _Renan
Part Number: SN74LVC2G06 Other Parts Discussed in Thread: SN74LVC3G06 , SN74LV05A , SN74LV06A Hi team,
Customer is seek Logic IC below condition. Do you have any recommendation?
Vcc=3.3V
Open-drain
multi channel
input L : output HiZ input…
Part Number: TXS0104E Other Parts Discussed in Thread: SN74LVC06A , SN74LVC3G06 A customer has TXS0104ERGYR on their board, and they have a couple of LED’s on it’s port B, which is powered by 3.3V.
If a Port B output pin is high, what is the drive capability…
Part Number: DP83869HM Other Parts Discussed in Thread: SN74LVC1G06 , SN74LVC3G06 , SN74LVC3G07 , SN74LVC1G07 , SN74LVC2G06 , SN74LVC2G07 Hi,
I work with vddio of 1.8V.
pls. advise who to drive the phy leds because direct drive is not working when…
Wonderful! Thanks so much for the sample code -- I'll go study that and the EDMA3 user's guide and hopefully figure this out.
I decided to hook up the HPI's !HINT to a GPIO line using several SN74LVC3G07 open-drain non-inverting bus buffers, and the…
