Part Number: SRC4190-Q1 Tool/software: Hi team,
Could you please address the SRC4190-Q1 question below?
In case the system #1 and #2 are independently working:
IN_CK1 and IN_CK2's frequency and phase are both synchronized. However, the phase has…
Part Number: SRC4190-Q1 Can the device be used with word lengths less than 16 bit (down to 8)? Ik want to use the device in I2S mode with a number of different word lengths and sample rates.
Part Number: SRC4190-Q1 Hello expert,
Could you please measure quiescent current under following condition?
VDD:3.6V
Fsin=Fsout=48kHz
Ta=85℃
Unfortunately, there isn't EVM of this device so we cannot measure this parameter by myself... …
Part Number: SRC4190-Q1 Hello Expert, My customer is using SRC4190-Q1. Also they are considering to optimize their system's cost now.
Then, they are confirming the possibility of removing 10uF decupling capacitor with SRC4190-Q1 even though our recommendation…
Part Number: SRC4190-Q1 Hello, Team,
We have 3 questions about input and output of SRC4190-Q1.
When input audio format is set to 24 bit I2S and actual inputted data is 16bit I2S, would there be a problem?
With the above setting, can we set output…
Part Number: SRC4190-Q1 Other Parts Discussed in Thread: SRC4190 Dear team,
Could you please help share with me the thermal information for our device? What is the value of θJA，θJB、θJC?
My customer is looking for asynchronous_sample_rate_converter…
Part Number: SRC4190-Q1 Is there junction temperature rating information available for this part?
The datasheet seems to show only the operating ambient temperature rating.
Is there any similar SRC part available or in development that’s rated for…
Part Number: SRC4190-Q1
Hello, Team,
SRC4190-Q1 is capable of accepting TDM input with TDMI input while also inputting I2S via SDIN. Based on this, our customer is thinking to use SRC4190-Q1 with a setting below:
If data is inputted to TDMI, would…
Part Number: SRC4190-Q1 Other Parts Discussed in Thread: PCM1754-Q1 Hello Team,
Customer want to use SRC4190-Q1 and PCM1754-Q1
Q. Is there any problem if they use the combination of SRC4190-Q1 and PCM1754-Q1?
Q. Is there example block diagram or…
Part Number: SRC4190-Q1 Hi TI-team
I understand that the RESET period needs more than 500ns.
1. How does the IC behave if the RST(RSTB) is changed from L to H with a time of 500ns or less ?
2.Are there any restrictions on the RST(RSTB) signal rise…
