Part Number: TAS2110TAS2110 works OK at lower volume levels, but overcurrent trips (and auto resets repeatedly) when output is more than ~2.5V RMS with a sine input. It does this with or without a speaker load. It works normally again when volume is…
Part Number: TAS2110 Other Parts Discussed in Thread: TAS2562 , TAS2563 Hello,
we have designed a custom board with the NXP iMX8M Mini processor and the TAS2110 audio amp. We are using YOCTO to build the Linux Kernel.
From this thread I learned that the…
Hi Ivan,
According to your guidance, the problem has been solved. Thank you very much for your continuous support during this period.
The clocks should be present before the device comes out of shutdown mode, otherwise it will detect TDM clock error…
Part Number: TAS2110 Hi team,
My customer is evaluating the TAS2110. Could you please support the following questions?
After booting the device, when switching the TDM_CFG2 from 00b (or 01b/10b) to 11b, a strange noise(abnormal audible noise) is generated…
Part Number: TAS2110 Hi team,
My customer is evaluating the TAS2110EVM. Could you please support the following question?
To determine the configuration parameters, I connected the speakers to the TAS2110EVM and used PPC3 to output the audio from the PC…
Part Number: TAS2110 Hi team,
My customer is evaluating the TAS2110 on their trial board. Could you support the question below?
Customer sent the following command to TAS2110 by I2C, but last command(w 98 02 0c) wasn't reflected and couldn't transition…
Part Number: TAS2110 Hi Sir,
Do you have TAS2110 EVM .brd file can share to us?
We DIN new project and customer request it for layout work.
Thanks, Ian.
Part Number: TAS2110 Hello team,
Could you please advise how to suppress the audible noise by the output filter setting?
Please find the waveform from the internal link here.
Best regards,
Itoh