Part Number: TAS5414C-Q1 Other Parts Discussed in Thread: TAS5414C Hello,
My customer is inquiring about recommended power inductors for the TAS5414C. They are currently using a Sagami DBL8087H-100M-R , 10uH dual core SMD 8x8mm, but would like to know…
Part Number: TAS5414C Hello,
I'm getting ready to purchase the TAS5414C EVM for testing. Does this EVM need the USB to I2C board to work? If so do I need to order the USB board separately and does it have a part number?
Thanks,
John
Part Number: TAS5414C Other Parts Discussed in Thread: TAS5414 Hi TI experts,
My customer is designing TAS5414. Only 1EA of TAS5414 is used in the application.
How using OCS_sync pin(61pin) of TAS5414? (Floating? connected GND? or other way?)
Please…
Part Number: TAS5414C-Q1 Other Parts Discussed in Thread: TAS5414 , Hi team,
We have made a board with B version DKD package in the past.
This time I will try to make a board again using TAS5414, but the C version has been released.
And C version…
Dear. Scott
Thank you for your quick supporting.
I attached picture as below.
- MUTE control by MCU is High, then /MUTE of TAS5414C is Low.
- MUTE control by MCU is Low, then /MUTE of TAS5414C is High.
I already tried to control Mute before…
Part Number: TAS5414C Other Parts Discussed in Thread: TAS5414 , TAS6424 , Hi All, Looking to design a constant power stereo amplifier that can output 25W into 2, 4, and 8 Ohms. The datasheet seems to indicate that the TAS5414 is fine to output 25W into…
Part Number: TAS5414C A customer is looking to use the TAS5414C-Q1 in a design and have a few concerns. It appears that there is a dot indicator for the pin1, but there is also a dent on the bottom side of the package. Which is the actual pin1 indicator…
Part Number: TAS5414C-Q1 Hi,
I have two question:
1) Power supply to TAS5414C-Q1 - I have an application with a load impedance of 1 Ohms that need around 50 Watts. This means I=sqrt(P)/R = 7.1A. Does the power source have to supply a current of 7…
