I was able to resolve the issue, and some of what you suggested was helpful in getting me on the right track. Here are some notes from my experience:
I was not able to use the TAS5782EVM to connect to my DUT. When I tried, there was no communication,…
Part Number: TAS5782M Hello guys,
I want to implement a SW function, that the TAS5782M can be used either in Mono or Stereo mode.
For me, the information in the datasheet is ambiguous.
Here, it shows that SPK_INB+ and SPK_INB- are supposed to be grounded…
Part Number: TAS5782M Hi team,
I have a customer design in TAS5782M and have some setting questions.
Can you setting these part by register? If yes, do we have a table for it?
Part Number: TAS5782M
Dear TI experts,
We use TAS5782M as the power amplifier on our products. The current test found that the SNR is too low (73dB A-Wtd). The following is our schematic diagram. Do you have any suggestions? Thanks!
Part Number: TAS5782M Hello , when I sign in for PPC3 update, get the Access Denied error message as below , can’t update. The reason like the software was expired.Could you tell me how to resolve this error.
Part Number: TAS5782M
can you help me. i want to update software version, but i have no access - time is out.
can you extend access to this module tas5782M-SW
Part Number: TAS5782M Hi Sir.
Our RD side raised quesiton below:
When we developed TAS5782, we found that Speaker +/- and TAS5782 SPK_OUTB+/- were reversed (as shown in attached figure), resulting speaker phase in a 180-degree opposite difference.
Please…
Part Number: TAS5782M Hi team,
My customer would like to know the EQ level of TAS5782M, I don't see that information in the datasheet, could you share with me, thanks.