Part Number: THS7368 Hello -
I have an NTSC/PAL video stream via a CVBS signal coming into the THS7368 SD1 channel. There is no on-board filtering and the output has a series 75Ω resistor.
When the BYPASS_SD pin is at a logic low (i.e. the 9.5M…
Part Number: THS7316 Other Parts Discussed in Thread: THS7368 , THS7364 , THS7372 Tool/software: Hi team,
What's the max resolution supported for THS7316? Is the resolution related to video buffer? or it's only related to the video signal source?…
Part Number: OPA360 Other Parts Discussed in Thread: OPA361 , , OPA316 , OPA858DSGEVM , THS7372 , THS7368 , THS7364 , THS7360
Dear Team,
we have some design questions regarding OPA360/OPA361
1) If the OPA needs to be enable all the time is it better to leave…
Other Parts Discussed in Thread: LMH6739 , LMH6704 , LMH6574 , LMH6572 , LMH6570 , THS7353 , THS7365 , THS7376 , THS7303 , THS7373 , THS7368 , THS7327 , THS7364 , THS7372 , THS7360 Hi,
I’m trying to design an amplifier for HD-TVI video. Do you have any amplifiers that…
Part Number: OPA615 Other Parts Discussed in Thread: OPA361 , OPA360 , OPA362 , THS7303 , THS7353 , THS7347 , THS7327 , THS7316 , THS7365 , THS7373 , THS7368 , THS7364 , THS7372 , THS7360 , THS7376 Hi Team,
Recently, we met an issue that the video signal DC part is…
Hi Ted,
I think you should be able to use the THS7319 as a distribution amplifier at 10MHz frequency. However, I don't think it will provide much harmonic filtering at 20MHz because the built-in filter itself has a -3dB cutoff frequency at 20MHz. You…
Part Number: THS7360 Other Parts Discussed in Thread: THS7368 Hi Sirs,
Sorry to bother you.
We have use THS7360.
1. Could you help check the schematic is OK ?
2. Our SF Channel VGA IN RGB is 700mV, But after passing SF Channel output will be 3v. It's will…
Other Parts Discussed in Thread: THS7368 , TVP7002 Hi,
We are trying to port DVR RDK to TI 8168 EVM board.
We have already configured TVP7002 and THS7368 (able to do I2c read/write).
Using VCAP + VENC + VDIS use case when:
scEnable=FALSE , we are able to…
Hi Badri,
Effectively, I have found the problem.
It is not the TVP the problem but the configuration of the THS7368 that is connected in front of the TVP7002.
The bandwith which was applied was 9.5MHZ for the SF channels.
I have modified it to apply a…
