Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810 , CDCLVC1102 AD conversion value is not returned at multiple device configuration using synchronous slave mode.
I conect two ADCs and mode settings are 32bit, no hamming, slave mode. Also…
Hello Zilin Li73
Good to hear that.
We have other TI designs including TIDA-00080, TIDA00834, TIDA-00810, TIDA-00835 that you could refer to based on your application need.
Thanks
Sreenivasa
Hi Brian,
Here are a few TIPD's you can review: We have used AMC1301 and AMC1100, AMC1200 in TIDA-00834 and TIDA-00810 and TIDA-00835 for measuring the AC voltage input. Additionally we have TIDA-00555 that showcases measurement of Voltage and Current…
Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810
Hi, we are designing a 4 channel sonar data sampling system, and we are going to use ads131a04 as the ADC converter. After reading the datasheet and some other related resources, we are…
Part Number: ADS131A04 Other Parts Discussed in Thread: TIDA-00810 Hello ,
In a new design we are using a ADS131A04.
It seems that there are no source code example exists for this chip, but maybe I am wrong , please let me know.
Thanks and Regards,
…
Hello Lovekush,
Please refer to the timing requirements and the switching characteristics in Table 7.6-7.7 as well as the diagram in Figure 1 for Asynchronous Interrupt Mode. As you can see, the rising edge of SCLK is used to shift data into/out of the…
Hi Cynthia, I am implementing the circuit and doing simulation as well. I am not sure whether I understood you. In this case, the limiting factor is minimum input bandwidth of ADS8568 - 6.7 MHz and AMC1301 output is 100 kHz ?
I have also seen several refer…
