Part Number: TIDA-010000 Hello,
I want to produce this EVM based on the production files in TIDA-010000 TI web ( https://www.ti.com/tool/TIDA-010000?keyMatch=&tisearch=search-everything&usecase=partmatches ).
Can you please share more detailed specs…
Part Number: UCC28711 Other Parts Discussed in Thread: TIDA-010000 , TIDA-00173 , UCC28740 Tool/software: Thank you very much for your help. Thanks to you, I am fully engaged in the development of SMPS as recommended by TI.
To use SiC MOSFETs (before…
Part Number: UCC28712 Other Parts Discussed in Thread: TIDA-010000 , TIDA-00173 Hi, customer want to use the UCC28712 in with Vin 850V to generate 12V. Do you have design proposal or reference design especial the series resistors?
Regards, Holger
Hi Brian,
Thank you for reaching with the query.
There are currently no reference designs with multiple output for UCC28750 as this a relatively new controller.
But we do have some with UCC28740 and it should be similar to to implement with UCC28750. …
Hi JH Shin,
Thank you for reaching out.
With external FET there are a lot of options. It depends of whether they want to use a primary side vs secondary side regulation.
UCC28750 is the low cost flyback controller and similar devices like UCC28740 and…
Part Number: TIDA-010000 Other Parts Discussed in Thread: UCC28600
Hi,
I am trying to redesign the reference design for a Motor Drive application with the following requirements: -
Input voltage
290–1000 VDC
Output voltage
24 V (3 A)…
Hi Raya,
Thank you for the query on UCC28740.
Yes this IC can be used for 650-1000V as required.
I can refer the following reference design which will be a good place to start:
1. https://www.ti.com/tool/PMP41009
2. https://www.ti.com/tool/TIDA-010000
…
HI Harish,
Thanks for the reply.
However, I have some doubts as follows:
The maximum frequency was selected following TIDA-010000 reference design where it is chosen to be 32kHz. So it should be okay, Right?
The board did turn-on initially for 2 days…
Part Number: UCC28740-Q1 Other Parts Discussed in Thread: TIDA-010000 , , UCC28740
Hi There,
I have designed a 50W flyback converter using UCC28740-Q1 with the 8 output (24V, 250 mA). I am only regulating a single output as I wanted to have an isolated…
Hello Siddharth,
I would recommend using a dedicated flyback controller similar to UCC28740, this will eliminate the need for a buck converter and save some efficiency.
Please use https://www.ti.com/tool/TIDA-010000 as a starting point for your design…
