Part Number: TMS320F28379D Other Parts Discussed in Thread: TIDM-1008 , C2000WARE , TIDM-1007
Hi,
I have checked current and voltage sensors. They are all working fine. The converter is working well in open loop.
Only a portion of the positive half…
Hi Rhea,
Sorry, I misunderstood your question in my initial reply and didn't look at the AD2S1205 device datasheet. You are wanting to interface with the digital side of the AD2S1205 device then?
The datasheet provides some reference below where a…
Part Number: TMS320F28379D Other Parts Discussed in Thread: TIDM-1008 I will use Tamagawa Engota with IDDK2.2. I noticed that in cl_f2838x_tmdxiddk_cpu1.c, the GPIO32 setting is not waiting to be done. So I decided to set GPIO32 to H level. I added the…
Hi,
Please refer to the https://www.ti.com/tool/TIDM-1008 for ENDAT implementation details.
If you have to read a certain parameter from the encoder use PM_endat22_setupCommand with ENCODER_RECEIVE_PARAMETER
Additionally, if you are reading…
Please review the Reference Design TIDM-1008 at TI website. The software is in C2000Ware. This design uses both SPLL and Sine Analyzer. This is a bi-directional PFC/Inverter design
Shamim
Part Number: LAUNCHXL-F28379D Other Parts Discussed in Thread: TIDM-1008 , Tool/software: Code Composer Studio Hello Team,
I am currently doing the project on the TIDM-1008 and LAUNCHXL-F28379D for EnDat Master Interface. I did the hardware and software…
Yun,
The EnDat 2.2 support we have on C2000 + CLA
Described here: https://www.ti.com/tool/TIDM-1008
The library is currently available for the F2837x devices. We are planning on releasing a version for the F28388x later this year but I do not…
We have used a combination of our SPI along with the CLB (configurable logic block) and some software to implement absolute encoder interfaces. In general the CLB controls the clocks required and the SPI is leveraged to send/receive frames. The CLB also…
For EnDAT support we have on C2000 + CLA
Described here: https://www.ti.com/tool/TIDM-1008
The library is currently available for the F2837xD devices but does not include the source code.
We are planning on releasing the source code later this…
Hi, Great to know that you've a working interface now with launch pad and tidm-1008. Please let us know if you run into any issues in future. Feel free to close this thread for now and start a new thread if you need any support in future.
