Part Number: UCC28C44
Hi Team,
My customer wants to find the Isolated Aux-Power for EC charger power-module fan cooling.
Vin:300~900Vdc (3-phase 380Vac rectifier) Vout:12V/17A*1;12V/1A*1 Pout:220W Topology: Flyback
Could UCC28C44 meet the requirements…
Make sure that the current sensing signals are good for build level 3 & 4. And set the correct ADC scale value (USER_M1/2_ADC_FULL_SCALE_CURRENT_A) in user_mtr1/2.h. And also set the right "sign" for the current coefficient based on the sampling circuit…
Part Number: TIDM-02010 Hi
While testing for PWMs, we are able to see PFC PWM signals. But, when Motor[0] flag is enabled module over current occurs. Can I know how it is possible to over come this.
Part Number: TIDM-02010 Hi
We are trying to drive a 5kW PMSM through the 1.5kW HVAC drive of TI.
We are using the same tidm-02010 and dual motor control algorithm for driving the motor.
We have changed the motor parameters according to 5kW motor and when…
Part Number: TIDM-HV-1PH-DCAC Other Parts Discussed in Thread: TIEVM-HV-1PH-DCAC Hi Team,
For TIEVM-HV-1PH-DCAC EVM, customer found there are sample code mention LED setup,
customer thinks that maybe some LEDs on this EVM,
we found there are two placeholders…
Part Number: TIDM-02010 When testing in open loop we are getting module over current fault. Due to this the pwms are not available. How to clear the fault.
Part Number: TIDM-HV-1PH-DCAC Dear team:
In interrupt void inverterISR:
//
// Generate the RAMP angle
//
RAMPGEN_run(&rgen1);
//
// Use the angle value to compute the sine value
//
invSine = sinf((rgen1.out)*6.283185307f);
Which principle…
Part Number: TIDM-02008 Good afternoon I'd like to rise up the question related with the algorithm used to drive switches on board TIDM-02008 when the device operates as inverter (3-leg interleaved single phase inverter) .
I'm mostly interested how looks…