Part Number: TL431LI Other Parts Discussed in Thread: TL431 , TLA432 , TL432 hi Team,
customer aim to find a TL431 which it can pass Two-way radio interference testing.
the current material on customer system, the voltage output will drop during test…
Part Number: TL431LI Other Parts Discussed in Thread: TLA431 Hello,
I have a question for the below I_min parameter, 1mA max. Is it max value for not all temp range but only Ta=25C condition. Is max value available for all temp range?
Regards, …
Part Number: TL431LI Other Parts Discussed in Thread: TL431 , TL432 Dear all,
i purchased some pieces of the TL431LIBQDBZR, but it seems the pinning in not the one of the TL431, but the one you can see in the picture enclosed.
Could you please confirm…
Part Number: TL431LI Other Parts Discussed in Thread: TL431 Tool/software: Hi team,
To compare the accuracy with TL431LI with NJM431, Ik is different in condition (10mA vs 1mA). Does it make difference on accuracy? How can TI prove TL431LIAI is better…
Part Number: TL431LI Tool/software: Hi Team,
I would like to confirm the temp coefficient calculation, should I refer to the equation in section 8.1 directly? And is the delta TA in the equation 165C(125- - 40)?
Regards,
Charles
Part Number: TL431LI-Q1 I would like to ask the maximum off-state current of TL431LI-Q1 at 125°C.
There are contradictory information in the datasheet. I use the following datasheet:
https://www.ti.com/lit/ds/symlink/tl431li-q1.pdf
There is a table…
Part Number: TL431LI-Q1 Tool/software: Hi Team I need some clarification.The cathode current IKA mentioned in datasheet is only the current consumed by regulator or it includes the load current.IKA_min =0.6mA for this part
Part Number: TL431LI-Q1 Other Parts Discussed in Thread: TL431 Tool/software: Hi Ti team,
I have a query regarding Vka voltage of TL431 in the feedback loop of dc-dc converter,
What is the VKA voltage value , is it same as Vef=2.5V??
From the…
Part Number: TL431LI Hi Reference Experts,
for TL431LI in the DS the continuous cathode current is specified with a max value of 18mA.
Do we have some data for short term load ?
My customer is looking into short loads up to 21mA for ~1ms.
…
