Part Number: TLC5946 We've designed the TLC5946 into a new product, and now testing prototypes. In our design we are using the DC mode to give 63 brightness levels, and not using GS mode. (MODE pin is HIGH).
On testing our prototype, we were unable…
Part Number: TLC5946 Other Parts Discussed in Thread: SK-AM64B , Hi,
I want to control LEDs just using DOT correction mode. Is there any example code that I can follow.
I'm using SK-AM64B board and tlc5946 connected to RPI header using SPI0. SPI mode …
Part Number: TLC5946 Other Parts Discussed in Thread: TLC5955 Hello,
I am starting a personal project with the TLC5946 to create a 3D LED matrix as an interactive display for my home. I have chosen to use the TLC5946 because it has many features that…
Hi Lumina,
If you no longer have any question, I will close this thread. Please feel free to contact me at steven-li@ti.com if you need further help.
Best Regards,
Steven
Hi Zhonghui,
LP5036 can separately control all output individually, by the color registers, while the brightness registers adjust 3 outputs at a time.
For TLC5947, the data format is different with TLC5944 and TLC5946. TLC5947 have 24 outputs and needs…
Part Number: TLC5946 I am considering TLC5946 for one of my applications. One piece of data I'm missing is the junction to package temp coefficient--could you please provide this?
Could you also please confirm if the “dissipation ratings” in the datasheet…
Part Number: TLC5946 Other Parts Discussed in Thread: TLC5952 , TLC5947 , , TLC5949 Hi team,
Could you please help check is there EOL risk of TLC5946/TLC5947/TLC5949/TLC5952 in the next 8-10 years? Since my customer is medical customer and they cares about…
Part Number: TLC5946 Hi,
I am not using XERR, SOUT, XHALF, EPAD, and two constant sink current OUT pins. What should I do with all of those pins? Leave them floating or connect to ground?
Thanks!
Emma
Part Number: TLC5946 I'm trying to run the LED using the TLC 5946. In my controller, There is a lack of signal for TLC 5946. SIN, SCLK, XLAT, BLANK, but the signal is coming out. GSCLK, no MODE signal. Do you need the circuits you need to get out? I wonder…