Part Number: TLV2374-Q1 Other Parts Discussed in Thread: OPA2171-Q1 , LT1014 , LT1013 Hi
I found this post. I understand the some method is allowable to prevent the negative input for this device.(input resistance and clamping diode)
On the other hand,is…
Part Number: TLV2374 Other Parts Discussed in Thread: TLV2373 Hello,
TLV2374 has 4 opamps, currently our application uses 3, should be left the 4th opamp connections floating or, should I simply tie to GND ?
There is a possibility that we can use the…
Part Number: TLV2374-Q1 Hi, Could you provide the TLV2374-Q1 Pin FMEA like follows? http://www.ti.com/lit/an/slva627/slva627.pdf
Best Regards, Yusuke/Japan Disty
Part Number: TLV2374 Is TLV2374 unity gain stable or not? I e can I connect it as a follower with gain = 1 and it is stable? I should be able to determine this myself if I think about it, but most OP amp datasheets say either "unity gain stable" or "stable…
Part Number: TLV2374-Q1 Customer is using TLV 2374-Q1. Noise problems occurred in the EMI test and countermeasures are required.
Q1. Could you give me some information and advice on recommended circuits and pattern information for this amplifier's noise…
Hello
1. We want to get 3V on the input of the U2 (this value set maximum illumination value).
We also don't want automatically to increase the output value of TLV2374 to - for example 3.3V as it involves a software change that control the D/A.
So,…
Other Parts Discussed in Thread: TLV2374 Hi Team,
I use TLV2374 as a G=1 forward amplifier. I need the maximum input impedance, so I don't set a input resistor in the + input. Power supply is 5V.
When the input is floating, the output will be 2.5V…
Other Parts Discussed in Thread: TLV2374 Hi All
I implemented four voltage follwer with TLV2374.
The two voltage follower is Reference voltage for NTC thermister.
And the others is NTC Thermister voltage divider buffer.
I saw the instability of voltage…
