Part Number: TLV62084EVM-828 Other Parts Discussed in Thread: TLV62084 Tool/software: Hi
I'm designing using TLV62084. If you look at the datasheet and WEBENCH, use the input cap to guide 10uF. But EVM has 47uF+10uF, which one should I do? Please also…
Part Number: TLV62084 Other Parts Discussed in Thread: TPS62822 , TPS62825 Hi,
I have several questions for switching frequency and over current / short circuit condition as attached file.
Could you please give me your support?
Regards, Nagata.…
Part Number: TLV62084 Hi,
My customer check the falling of PG while Vfb is falling. He found PG is falling at Vfb=0.362V which is out of datasheet spec.
He thinks the device may have detection time to falling PG. Attached is report using with TI TLV62084EVM…
Hello Michael,
The switching frequency and load current characteristics shown below are performed by using the TLV62084EVM ( TLV62084AEVM-828 Evaluation Module ) by the following conditions.
Input Voltage = 5 V
Output Voltage = 1.2 V
Load Current…
Hello Given,
The switching frequency and load current characteristics shown below are performed by using the TLV62084EVM ( TLV62084AEVM-828 Evaluation Module ) by the following conditions.
Input Voltage = 5 V
Output Voltage = 2.8 V
Load Current…
Hello Michael,
Thank you for the waveforms. I did not find any concern with the PCB layout.
Why is this difference happened?
As I said before, In DCS control the switching frequency may vary due to many factors such as circuit losses, propagation…
