Part Number: TLV9030 Tool/software: Hi,
For our application, the (IN-) goes to about -700mV to -800mV. However due to our circuit configuration, the current though the (IN-) should be less than 10mA.
So is it ok that we are exceeding -300mV as per…
Part Number: TLV376 Other Parts Discussed in Thread: LMV761 , TLV9030 , TLV9351
Hello,
I want to use the TLV376 as comparator because there is a requirement of low input offset voltage.
My question is: Does the the TLV376 have any internal structures…
Part Number: SN74AHC1G14 Other Parts Discussed in Thread: TLV9030
Tool/software:
When using SN74AHC1G14 as the trigger output PWM control output current; The deviation of the products with silk-screen printing of 38SH is much greater than that of…
Part Number: TXH0137D-Q1 Other Parts Discussed in Thread: TLV1872 , TLV1851 , TLV9030 , TL431 , ATL431 Tool/software: Hi Sirs, Does TI provide a level shifter to compatible with wide input range from 1.2V to 12V, fixed 3.3V push-pull output for logic…
Part Number: SN74AUP1T17 Other Parts Discussed in Thread: SN74LVC1G17 , TLV3201 , TLV9030 Dear Team,
Please help review following designs and comment. Thanks.
Schmitt Trigger
Input voltage swing is from 3.6V to 1.2V. It could not be recognized…
This is not specified. I would certainly expect it to be below 200 ns, but there is no guarantee.
Your largest problem when using this devices with PWM are the slow rising edges of the open-collector output. I would suggest a comparator with push/pull…
