Part Number: LM2904-Q1 Other Parts Discussed in Thread: LM2904LV , TLV9151-Q1 How to caculate the Vcm, in dual and single power supply cases?
What will happen if the Vcm over spec and why?
Part Number: LMV321 Other Parts Discussed in Thread: LM321LV , TLV6002 , TLV9151 , TLV9001 Hi,
Customer looks for replacement for ST LMV321. His concercern is p2p(SOT23-5) and offset.
The offset of ST/LMV321 is 0.1mV(TYP). TI LM321LV is 1mV, and TLV6002…
Hi Jason,
Unfortunately, all of our shutdown op amps greater than 11V supply are active high and do not match the TLV2370 operation. The TLV9151 is the best alternative but would require a change in shutdown design.
Please let me know if you have further…
Hi Daniel,
Daniel Mueller said: In my design I’m using the TLV271 (INA 240/241, TLV9151 are not available) for low side current sensing.
Why couldn't you use the driver build-in current shunt amps instead of adding external opamp?
Brian
Removing GND violates the absolute maximum ratings.
In general, you should design the system so that ground is removed last. If you need to remove signals, use an opamp with shutdown function, e.g., TLV9151 or OPA991.
Why is it necessary (or possible…
Please put a number on "precise".
For example, the LM4040-N is a 5 V voltage reference with 0.1 % accuracy in the A grade. The TLV9151 has an offset voltage of 0.75 mV; the OPA196, 0.1 mV.
Robert,
Impressive, thx for your explain.
I notice that the TLV9151 stand high impedance state when shunt down.
So i want to know if TLV9151 will still cause quiescent consumption when shunt down?
Thx
Part Number: TLV2371 Other Parts Discussed in Thread: TLV9151 Hello Team,
I am looking for an alternate to the TLV2371IDBVR given it is out of stock. The SOT-23 5-pin package is a requirement. I did see the TLV9151, but that package is also sold out. Are…
Other Parts Discussed in Thread: TLV9151 , OPA704 Hi Sir,
My customer would like design OPA to replace MC33201-D.
Would you please provide recommendation for this? pin to pin is prefer.
thanks for help!
BR,
SHH
