Part Number: TMCS1100 Other Parts Discussed in Thread: AMC3302 Hi TI expert,
I have found below paper comparing TI AMC3302 shunt-based scheme with hall-based CLCS(closed-loop current sensor) solution.
https://www.ti.com/lit/pdf/sbaa464
The result shows…
Part Number: TMCS1100-Q1 Hi team,
My customer wants to know what is enabled/disabled while it is in "quiescent" state.
Shown in this datasheet.
Thanks, Luke
Part Number: TMCS1100-Q1 Hello Team,
My customer is using the TMCS1100-Q1 and wanted to know how much current the chip draws when in use?
Regards,
Renan
Part Number: TMCS1100 f the voltage of REF terminal is between 2.5v to 5V(VDD), how this IC's output would behave?
Isn't that inconsistent with Vref being 0-2.5V?
If so I like to develop a circuit which can measure -90A to +90A by using inverting…
Part Number: TMCS1100 Hello Team,
My customer is planning to add varnish to the component by coating. Question if the pollution degree (PD) decreases from 2 to 1 by doing this?
Regards,
Renan
Part Number: TMCS1100 Hi,
in the Datasheet as well as in the product folder it say's for the TMCS1100 and TMCS1001 that it will work for 5V and 3.3V with even a min. spec of 3.0V Vcc. When although lookign to the tables inside the Datasheets there…
Part Number: TMCS1100 Hello support team,
My customer has interested in TMCS1100, but, they have concern if TMCS1100 has proper behavior under external magnetic field. Do you have any test data, e.g. how many external magnetic field does not cause wrong…
Part Number: TMCS1100 Other Parts Discussed in Thread: TIDA-010062 Dear Team,
I see TIDA-010062 using TMCS1100 for the PFC current loop control
The PFC stage switching frequency(Fsw) is around 100kHz.
Base on my experienced, the control loop bandwidth…
Part Number: TMCS1100
I am currently planning on using the TMCS1100A2 device, located on the high side of my power supply.
Preceding the TMCS1100 is a protection MOSFET. When the Protection MOSFET goes open circuit, causing a fast negative slew rate…