Search tips
Showing 104 results View by: Thread Post Sort by
    Answered

  • TMCS1100: Cases and documents that adopted TMCS1100 for DCDC current control

    Resolved
    Part Number: TMCS1100 Hi, TMCS1100 has a narrow frequency band, however I feel that it can be used for DCDC applications depending on the current control method. Please let me know if you have any information on the adoption record and application notes…
    • Resolved

  • TMCS1100-Q1: Unidirectional operation

    TI Thinks Resolved
    Part Number: TMCS1100-Q1 Other Parts Discussed in Thread: TMCS1100 Hi, Good day. Our customer wants to run this in unidirectional mode but they are not certain of how much negative current this device can take in that mode. They want to know what is the…
    • Answered

  • TMCS1100: Isolation Voltage

    Resolved
    Part Number: TMCS1100 Hello, with Viowm = 424Vrms according the data sheet I can use the TMCS1100 to measure the current of a 230V AC line, correct? Thanks for confirmation, Hans
    • Resolved

  • TMCS1100: TMCS1100A2

    TI Thinks Resolved
    Part Number: TMCS1100 hello Ti, part: TMCS1100A2 , VCC = 3.3V we connected 1uF capacitor at output of TMCS1100 IC, the hall ic gets faulty after some time , it does not give output or start to give some voltage e.g. 2V while no current is flowing what…
    • Answered

  • TMCS1100: TMCS1100

    Resolved
    Part Number: TMCS1100 Hello dear TI team. Please, help me clarify the question with Vrefrence's input. I see 1.6 V on this pin. What is this? Is it correct behavior? And when add some reference 2.5V. A see the summary of both = 4.2 V. So it looks like…
    • Resolved

  • TMCS1100: TMCS1100A2 gets damaged

    Part Number: TMCS1100 hello Ti, part: TMCS1100A2 , VCC = 3.3V we connected 1uF capacitor at output of TMCS1100 IC, the hall ic gets faulty after some time , it does not give output or start to give some voltage e.g. 2V while no current is flowing …

  • TMCS1100: TMCS1100 insulation

    Part Number: TMCS1100 Hello! Willing to use "TMCS1100" in a three phase 380Vac Motor circuit, as current sensor: I'm not quite sure if +-600V insulation of the device is enough. TI says: ".......Inherent galvanic insulation provides a 600…

  • TMCS1100: TMCS1100

    TI Thinks Resolved
    Part Number: TMCS1100 Sir, I want to use TMCS1100 for current measurement of DC continouos current : 60A DC @ Voltage : 26V DC. TMCS1100 Powering up with 5 VDC. It does suit my application, please suggest an alternate part. Regards Murthy

  • TMCS1100: Different output in Spice models

    TI Thinks Resolved
    Part Number: TMCS1100 Other Parts Discussed in Thread: TINA-TI Hi E2E, Our customer was simulating the TINA TI and Pspice models of TMCS1100A4 and it has different output as seen in the attached figure. The TINA-TI shows the output value according to…
    • Answered

  • TMCS1100-Q1: No Vs=3.3V data for A4 version? Not recommended?

    Resolved
    Part Number: TMCS1100-Q1 Other Parts Discussed in Thread: TMCS1100 Hello, I've been looking at the TMCS1100 series of current sense ICs and the sensitivity of the A4 version would give better measurement resolution compared to the A3 version. However…
    • Resolved

Didn't find what you are looking for? Post a new question.