Part Number: TMS320F28054M I have developed a drive based on the instaspin technology. I have found out that if the drive reaches voltage saturation ( full speed) on no load and then if load torque(motor current) is increased, the current waveform starts…
Part Number: TMDXCNCD28055ISO Other Parts Discussed in Thread: TMS320F28054M , , MOTORWARE Hello ALL,
Can I put a TMS320F28054M MCU on the TMDXCNCD28055ISO controlCARD and use it to run the MotorWare labs on hvkit_rev1p1hvkit_rev1p1 development kit?
If yes…
Part Number: TMS320F28054M Other Parts Discussed in Thread: C2000WARE Does someone know if it is possible to perform FLASH reprogramming through SCI-A bootloader or one can only load some code to RAM that way?
Part Number: TMS320F28054M Other Parts Discussed in Thread: MOTORWARE Hello,
We have a custom design based on the TMS320F28054M that runs one type of 3 phase induction motor just fine. The engineer that designed and implemented this setup is no longer…
Part Number: TMS320F28054M Other Parts Discussed in Thread: MOTORWARE Hi,
We have a problem when sending a zero reference speed to the motor as the motor starts to oscillate and vibrates. How can we disable such oscillation?
Things we have tried:
1. Hardcoding…
Part Number: TMS320F28054M Other Parts Discussed in Thread: BOOSTXL-DRV8305EVM , CSD88599Q5DC , CSD88584Q5DC , MOTORWARE There are 2 almost identical designs, one is working flawlessly another does not. Schematics of the working board are below:
Compared…
Part Number: TMS320F28054M Does 28054M support absolute encoder? If not, any chip that support that? incremental encoder doesn't work well with our project.
Any suggestions would be appreciated. Thanks!
The GUI uses the ccxml file at C:\ti\guicomposer\webapps\InstaSPIN_F2805xM_UNIVERSAL\appConfig.ccxml
If you were using the same emualtor to connect in CCS, you may copy the contents of the working ccxml into the appConfig.ccxml and see if that allows…
