Part Number: TPL5010-Q1 Dear Masters,
Do we have PSpice simulation model for TPL5010-Q1? One of my customer want to do some simulation to verify their function before making the circuit.
Thanks.
B&R
Eric
Part Number: TPL5010-Q1 Hello,
My application need to be powered by 3,3V supply and de RSTn pin must be pulled up by a 100k resistor to a 5V power supply.
But, there are no mention for the maximum voltage suported on the RSTn pin.
May I pull up this…
Part Number: TPL5010-Q1 Hi,
- 1 -
Let me confirm about accuracy of "twake".
According to datasheet, center value of pulse width is defined "20 ms".
However, there is no information about max/min value.
Could you please tell me accuracy…
Other Parts Discussed in Thread: SN74LVC1G17-Q1 , TMUX1309 , TPL5010 , TPS2663 We are in need of some details regarding this part which we are currently using in our design to check the drive strength.
Kindly provide value for the red color highlighted things…
Part Number: TPL5110 Other Parts Discussed in Thread: TPL5010 , TPL5010-Q1 , Hi,
We wish some precisions about TPL5110 features.
We found this description about TPL5110 from TPL5010 datasheet :
• TPL5010-Q1 - Supply Current 35 nA – Low Power Timer – Watchdog…
Hi Sheldon,
No, we don't have AEC qualified RTC. We have three automotive grade timers. TPL5110-Q1, TPL5010-Q1, TLC555-Q1. Please check if they fit customer's application.
Part Number: LMC555 Other Parts Discussed in Thread: TPL5111 , TPL5010 , CD4040B , TPL5110-Q1 Dear team,
Customer use LMC555 want to set the time delay to 12s, and want to control the accuracy at about +/-0.1s. But during their test, the accuracy nearly…
Part Number: TPS3840-Q1 Other Parts Discussed in Thread: TLV840 , TPL5010 Hi Team,
I know our reset IC could achieve delay function but customer would like to have below extra function, do you have any idea how to achieve or any IC could meet the requirement…
Your understanding of the startup sequence is correct. However, please be aware that for #4, the WAKE pulse will not arrive until the time has elapsed.
In other words, the DONE pulse does not immediately cause a new WAKE pulse. The WAKE pulses are always…
Q1: In which conditions, the power on reset will occur in the TPL5010? I have tested the TPL5010 and found that power on reset occured when the supply voltage of TPL5010 is increased by 500mV or more. But I couldn't find any word about power on reset…
