Part Number: TPS26630-33EVM
The TPS26630 and TPS26631 devices with a fixed overcurrent limit threshold the maximum output power limit increases linearly with supply input , I want confirm TPS26630 PLim(maximum power limit) is ?
Part Number: TPS26630-33EVM Hi Team:
I want to use one pin to indicate OCP, OVP, UVP, OTP and power good, so should I connect PG and FLT together to achieve this function? Or use a diode between PGTH and FLT like in the picture I pasted? THANK YOU.
In…
Part Number: TPS26630-33EVM Hi
For PD3.1 EPR 5V/3A to 28V/5A application, If I using TPS26630-33EVM modfiy to fullfil.
1. Change OVP.
2. Change UVP.
3. Change OCP.
Anything I missing in this application? Can provide calculator tool to us?
Does TI possible…
Part Number: TPS26630-33EVM Hi,
I have 10mF capacitive load. I couldn't charge the capacitors with EVM board. Please check the scope screen, it is output pin. Input is 28V. DV/DT cap is 1uF. Current limit is 3k.
Part Number: TPS26630-33EVM I am having some trouble getting the TPS26631 to perform as expected. I am using the device as input protection for a device and have the following requirements: reverse polarity preotection, uvlo (9V), ovlo (30V), overcurrent…
Part Number: TPS26630-33EVM Hi support team,
It seems that current is leaking to the output when the output current is limited.
J5: Open, J4: 9-10 short (0.6A), VIN_SYS1=24V (adapter capacity 3A), electronic load (3A) on output
The leaking current is…
Part Number: TPS26630-33EVM Other Parts Discussed in Thread: TPS2663 , LM5176
Hi team,
customer want to know what's the mechanism of OVP and OCP in below design, how can it handle dynamic Vout in PD3.1 (28,36,48V) ?
would you elaborate it for me, …
Part Number: TPS26630-33EVM Hi support team,
Please let me know the purpose of D4 and D9.
1. I think that current will flow for a moment when the power supply is connected in reverse. Is it to prevent current from flowing in the load circuit?
or
2. Is…