Answered

• TPS40210EVM: What is the R3 for?

  

  Kazuhiko Hirano

  Resolved

  Part Number: TPS40210EVM Hello, According to datasheet, Css si connected between SS pin and GND to adjust soft start. However, EVM has an additional resistor R3 (10Kohm) in series. What is the R3 for? Best regards, K.Hirano

  • Resolved

  • over 1 year ago
  • Power management
  • Power management forum

• TPS40210EVM: Vout Peak-to-Peak

  

  Frederic Beck

  TI Thinks Resolved

  Part Number: TPS40210EVM Other Parts Discussed in Thread: TPS40210 Hello, i had some issues with the TPS40210EVM. I used the original eval-board (Vin: 8V - 14V / Vout: 24V / Iout: 2A). I measured the Vout and the ripple of it and it seems to be a problem…

  • over 2 years ago
  • Power management
  • Power management forum

• TPS40210EVM: Bode plot frequency limit

  

  Kelvin Le THS

  TI Thinks Resolved

  Part Number: TPS40210EVM I noticed that the EVM user's guide Figure 9 has the bode frequency up to 1Mhz. The design switching frequency is 600 kHz. I have heard from a number of power designers that the bode plot is only valid up to half the switching…

  • over 2 years ago
  • Power management
  • Power management forum

• TPS40210EVM: Possibility to damage from open gate driver

  

  Satoshi

  TI Thinks Resolved

  Part Number: TPS40210EVM Other Parts Discussed in Thread: TPS40210 When TPS40210EVM GDRV pin open(NC), is it possibility to damage? (= Removed R9 resistor) I think that in this condition become high duty GDRV and damage, is it correct? Best regards, …

  • over 3 years ago
  • Power management
  • Power management forum

• TPS40211EVM-352: Constant current to an inductive load (using LED constant current eval board)

  

  Tim Grossen

  Part Number: TPS40211EVM-352 Other Parts Discussed in Thread: TPS40211 , TPS40210EVM We are testing a TPS40211 evaluation board and have the current set at .55A by changing the resistor to .47 ohm. This works from 25C to 100C, constant current. However…

  • 12 days ago
  • Power management
  • Power management forum

• TPS40210EVM: physical dimension of the TPS40210EVM

  

  Jochen Rapp

  TI Thinks Resolved

  Part Number: TPS40210EVM I need the physical dimension of the TPS40210EVM evaluation-Board Regards Jochen

  • over 4 years ago
  • Power management
  • Power management forum
Answered

• TPS40210EVM: TPS40210EVM PCB gerber Schematic drawing source

  

  Nikolaus Ng

  Resolved

  Part Number: TPS40210EVM Other Parts Discussed in Thread: TPS40210 Hi, May we obtain the PCB gerber file for the TPS40210EVM ? Thanks.

  • Resolved

  • over 6 years ago
  • Power management
  • Power management forum

• TPS40210EVM design for Altium

  

  FranzSilva

  Other Parts Discussed in Thread: TPS40210EVM I bought the TPS40210EVM to do some tests. I would like to have the design of this board to be able to open and edit in the Altium. Someone could send to me or make available? Thank you

  • over 6 years ago
  • Power management
  • Power management forum

• TPS40210EVM

  

  sakthivel s

  Other Parts Discussed in Thread: TPS40210 , TPS40210EVM HI, I have made a DC-DC converter circuit using TPS40210 with 12V to 100V and 0.1A using WEBENCH. so, for making layout i tried TPS40210EVM footprint and gerber files but, i can't get anything. so…

  • over 8 years ago
  • Power management
  • Power management forum

• TPS40210EVM

  

  Bahadur Sagoo

  Other Parts Discussed in Thread: TPS40210EVM Hi, I am using the TPS40210EVM board. I need to know if I could apply 28 Volts at the input for a higher output voltage say 30 volts. I know that C8 has to be changed to a higher voltage rating say 50 volts…

  • over 8 years ago
  • Power management
  • Power management forum

Didn't find what you are looking for? Post a new question.