Part Number: TPS54061 Hello guys,
One of my customers is considering using TPS54061 for their new products.
They want to get a answer of the following question for case of EMI problem happened.
Ques. Can 5~10 ohm resistor be inserted between BOOT terminal…
Part Number: TPS54061 Hi
We want to design inverting output circuit with TPS54061.
The requirement is as below.
Input : 24V
Output : -17V/100mA
Do you have any materials or reference design that can be help to refer?
Part Number: TPS54061 I need your help here regarding one of the switching regulator used in the design. We are using TPS54061 and need to regulate 24VDC output, although this is used just to provide power to 24V relays.
The schematics we are using is…
Part Number: TPS54061 Other Parts Discussed in Thread: LM5165 ,
in the datasheet of the TPS54061 is written that Iq is 90uA (typ) under the following condition: Operating – Non switching.
What does it means Operating but not switching…
Part Number: TPS54061 Hi, team.
From the background that the getability of ceramic capacitors is bad recently, customers asked the followings.
Could you support me?
Q：What is the voltage that must be kept at the minimum when selecting the BOOT capacitor…
Part Number: TPS54061 Tool/software: WEBENCH® Design Tools Hi Tis,
My ctm use TPS54061 as their buck DC/DC, Input is 12V ,output is 5V /200mA. At beginning provide 12V input, the Output is 5V,but it lasted a short time, it went down to 0V。But when after…
Part Number: TPS54061 I am designing a buck converter that should go from 36.5V-55V to 12V. Output current is between 20mA and 150mA. Switching frequency is 1.1 MHz, and according to the datasheet I put a 49.9k ohm resistor between RT pin and ground to…
Part Number: TPS54061 Tool/software: WEBENCH® Design Tools Hi Sir,
I simulate TPS54061 by webench, but show error. it seems "calc Iout/Isw" over "Iout/Isw".
how to get/calc these two parameter?
my condition is Vin=10~20V; output is…