Part Number: TPS60400 I applied the doubler circuit. Why Vin=5V but the VPOS result is11.4V when my diode choose 1N5819?
and what is the maximum output current of doubler?
because i add 30mA load and then vout drop to 8.67V...
Part Number: TPS60400 Other Parts Discussed in Thread: TPS629210 , TPS63700 Hi support team,
Is it possible to use TPS6040x in the following ways? I want to input negative voltage and output negative voltage.
VIN = -5V VOUT = -10V
Part Number: TPS60400-Q1 We are using the TPS60400QDBVRQ1 inverter now in one of our product type in my company.
This is a product that has an operating temperature of -40 degrees to +125 degrees.
We now want to use this inverter for a new product…
Part Number: TPS60400-Q1 Dear All, I am trying to generate a -3V thanks to the TPS60400Q1 device, in a system I designed However, when I power on the system (Vin = 3V), it generate a -0.8V, that drops to -0.3V after a few seconds
Please find below the…
Part Number: TPS60400-Q1 Other Parts Discussed in Thread: LM2776 , SN74LVC1G14-Q1 Hi Team,
The recommended operating voltage is 5.25V, and the max is 5.5V. Is there any concern with operating this at 5.3V.
Application 5.3Vin -> -5.3Vout
Part Number: TPS60400-Q1 Other Parts Discussed in Thread: TPS60400 The whole vehicle CAN has no communication, and the analysis down is this chip on the board: chip failure: pin1 & pin4 voltage drop value is abnormal, caused
Part Number: TPS60400 Hi support team,
Can TPS6040x be used as tripling inverter?
Is the schematic with the following connection of the third device correct?
Second "OUT" -> Third "GND" Second "GND" -> Third "IN"…