Part Number: TPS62736 I have a PCB which uses a TPS62736. VIN is connected to the battery (3.7v nominal). Desired output is 3.3V. I use R1=4.12m, R2=634k, R3=8.25m.
In my first run of PCBs -- there was an error on my BOM, and R1 was mistakenly placed…
Part Number: TPS62736 IN (pin #1, supply voltage) is 4.2V in normal conditions
VOUT is set at 3.3V
VIN_OK is set at 3.52V, through the 4 resistors bridge on VRDIV, VIN_OK_SET, VOUT_SET, VON_OK_SET.
Question: could I tie VIN_OK to EN2 -- as shown…
Part Number: TPS62736
Hello,
I'm making the converter for energy harvesting with the device TPS62736 above.
I would like to ask how to design resistance of R1, R2 when I don't need to use the function 'VIN_OK_SET'.
I have already checked that…
Part Number: TPS62736 *question is not specific to TPS62736 but on a general document for power management devices*
Hello and good day!
Can you please advise if there is a documentation of how the equations are derived in this guide ? Customer is…
Part Number: TPS62736 Team,
I plan to use the 4 resistor network (with VIN_OK pulled to VIN to disable) and need to know how critical the 13MOhm sum is to the operation of the circuit. Being size constrained I want to use 2ea. 0201 resistors for this…
Part Number: TPS62736 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models I am trying to use the PSICE model of the TPS62736 in the TINA simulation tool. When I import the library or try the new macro wizard I get an error…
Andrew,
I would recommend using TINA-TI instead. We can convert the model to TINA-TI if you are OK with using it.
Alternately, if you need the unencrypted model, please refer to the following post: e2e.ti.com/.../3052.encrypted-models
Part Number: TPS62736 A customer is issuing an Supplier Non-conformance Notification (SNN) on
TPS62736RGYT . Per the attached data and images the orientation of various lots are not always correct in the tape and reel. In the short term, the customer…
