Part Number: TPS7A69-Q1 Tool/software: Hello Expert,
My customer is using TPS7A69-Q1. The 2nd level power has a leakage current which can cause VEN (3.38V) and VSO are over Vout=3.3V. Are there some risks?
Part Number: TPS7A69-Q1 Other Parts Discussed in Thread: TPS552872-Q1 , Tool/software: The TPS552872-Q1 has an internal current source of about 5uA, causing the PG and SO pins of the TPS7A6933QDRQ1 chip to exceed the 3.3V voltage.
Whether there…
Part Number: TPS7B85-Q1 Other Parts Discussed in Thread: TPS7A69-Q1 , Hi, Team,
What is the spec difference between TPS7A6933-Q1 and TPS7B8533-Q1? Why is the price of x6933 is times of higher than x8533? Is x6933 not our hero device any more?
Thanks…
Part Number: TPS7A69-Q1 Hello expert,
About TPS7A69-Q1,you said that I_max_RES is Ilkg=1uA, can I understand that the RESET pin can only withstand a maximum current of 1uA?
Would this be too small? If I use 5V VDD to pull up and connect a 2.4KΩ resistor…
Part Number: TPS7A69-Q1 is PIN-PIN to another LDO IC in our product, we add a 1uF cap between PIN3 and GND
There is another LDO IC in our product, in which PIN3 should be add a 1uF cap to GND. Now we wants to add a PIN-PIN alternative source TPS7A69…
Part Number: TPS7A69-Q1 Hello expert,
About TPS7A69-Q1,p ls provide some parameter, which is not found in the datasheet.
1.I_max_RES. (the maximum current of RESET PIN)
2.Input to output voltage difference in undervoltage condition(VIN = 4 V,…
Part Number: TPS7A69-Q1 I have pin 2 Si tied to the output with a 10K.
I have pin 7 So floating, it is open Drain.
Will this effect EMC performance or have any effect on the function or specs?
Will the output of So oscillate?
Why does the data…
