Part Number: TPS7A78EVM-011 Other Parts Discussed in Thread: TPS7A78 Dear experts,
If Possible, Can you Please share Altium design File of TPS7A78EVM-011.
Regards,
Rishabh
Part Number: TPS7A78EVM-011 Hello,
Our customer tested TPS7A78EVM-011 standby power at the EVM default setting and measured 180mW standby power. However the EVM document specifies 104mW at 120V/60Hz, no load test condition. So the customer is annoyed…
Part Number: TPS7A78EVM-011
hello. T/I Product : TPS7A7850PWPR order number: T02516660 Problem: FAIL occurred during the withstand voltage test while CE (IEC62368) standard certification was in progress through SGS (IEC certification body).
Withstand…
Part Number: TPS7A78EVM-011
Hi Team,
Our customer bought TPS7A78EVM-011 evaluation module and noticed that at 230Vrms input voltage and no load, the power consumption is 6.9W. Table 2 of the user's guide states that the Pstandby is 104mW when the R6 and…
Part Number: TPS7A78EVM-011 Other Parts Discussed in Thread: TIDA-010036 , TPS7A78 Hello,
The EVM user guide (www.ti.com/.../sbvu048.pdf) states that the R5, R6, and R7 are rated at 0.25W and that the EVM can supply 55mA in the full-bridge configuration…
Part Number: TPS7A78EVM-011 Other Parts Discussed in Thread: TPS7A78 hi,
we plan to perform some hot-plug and +/-1kV surge tests on TPS7A78EVM.
May you confirm resistors R5 / R6 / R7 are for surve immunity performance improvement?
Should we adjust their…
Part Number: TPS7A78EVM-011 Hi
Please can you provide the CE/EU Declaration of Conformity for TPS7A78EVM-011 ?
This product is CE marked but the CE/EU Declaration of Conformity is not available on the T.I website,
Thank you very much,
Chris
