Part Number: TRS3386E Other Parts Discussed in Thread: MAX3386E Dear Specialists,
The customer is considering TRS3386E because MAX3386EIPWR will be discontinued.
I would be grateful if you could advise.
• What is the difference between TRS3386EIPWR and…
Part Number: TRS3386E Other Parts Discussed in Thread: MAX3386E , TRS3122E , TRS3253E Hi Sir,
Our customer want to used the TRS3386E for VL=1.8V application,
But the Datasheet is show the VL change to 2.5V level,
We are see the E2E have same discuss of 20110616…
Part Number: TRS3386E Other Parts Discussed in Thread: TRS3232E Hello,
I'm posting on behalf of my customer. Can you please send me current vs. load characterization for the TRS3386e? I am mainly interested in 38.4kbps and 120kbps rates.
Thanks…
Part Number: TRS3386E Hi,
I would like to check the Rise and Fall time for the TI's RS232 Transceiver TRS3386, and Please let me know which part I should see on the datasheet.
1. TI Part :TRS3386 2. Ask for rise and fall time by data rate.
thanks…
There is no transceiver that allows selecting LVTTL voltages.
Anything involving RS-232 voltages needs extended power supplies. It might be possible to combine an RS-232 transceiver with three drivers like the TRS3386E/MAX3386E and a > 10 V switch like…
Priyanka, How many input and output channels does the UART have? Here are devices with logic voltage translation or low VCC operation. TRS3318 TRS3253E TRS3386E
Hello Nikolaus, The transistor sizing in the voltage translation circuit of the TRS3386E causes a propagation delay that becomes quite long when VL is 1.8V and low temperature is applied. This is true for all date codes of TRS3386E and TI MAX3386E. TI may…
There are no known issues with respect to I2C1. I was just looking at the LogicPD EVM schematics and wondering if perhaps there's some kind of board issue related to using I2C1. There's a lot of pin muxing on those pins, e.g. they also happen to be…
Hello Suraj,
1. Power supply of dspic33FJ256GP710A 3.3 to 3.6V. The GPIO of the AM1808 is configurable for 1.8 & 3.3 V .If you configure the 3.3V GPIO then you can interface with PIC
33f without level translator otherwise use SN74AVCH8T245 (8…