Part Number: TWL6032 Other Parts Discussed in Thread: TWL6030 Dear TI Team,
Greetings of the day ! !
We are planning to use PMIC IC with several Buck IC's, LDO's ,ADC and supervisory circuit in our hardware design. While checking regarding it, TWL6032…
Part Number: TWL6032 Other Parts Discussed in Thread: TPS80032 Hi Team,
Could you share the complete datasheet of TWL6032 with customer?
Customer would like to confirm the timing..
Part Number: TWL6032 Dear,
We are using TWL6032 + omap4460 for our product, and met some problem on battery charging. Capacity of the battery we are using is 3600mAh. While battery is over discharged, connecting charger to the device, precharge will…
Part Number: TWL6032TWL6032, can we GND the VBUS_B1-B3?
Now the USB_OTG_VBUS is from the debug port, but not for battery charging? customer found the USB_OTG_VBUS to PMIC will interfere with Vsys (5V).
Part Number: TWL6032 Other Parts Discussed in Thread: TPS65950 Hi team,
I received a question about TWL6032 RTC accuracy from my customer
Customer is using TWL6032 for their products, but it seems that there is a large time lag on RTC. Therefore…
Part Number: TWL6032 Team,
I have a customer that has just begun production runs on a product containing TWL6032. They've had a few issues where they believe it is being caused by the battery initially being plugged in backwards. Are there any recommended…
Hi Robert,
Good to hear the HZ_MODE worked for you.
I've just sent you the App note we have describing how the Gas Gauging is supposed to work. I have not had to work with the gauging before; but if you come up with questions I can try to work through…
Part Number: TWL6032 Hi Team,
We are unable to start the HW WD on the TWL6032, and it seems we don’t have the WD available.
Could you please advise how to enable and start it?
We have only one option to interface with the twl6032 watchdog - to…
Part Number: TWL6032 Other Parts Discussed in Thread: TWL6030 HI Sirs:
Our cutomer found the voltage leakage 2.5V at Vsys through the USB_OTG_VBUS 5V of PMIC. If we remove this connection, there will be no voltage leakage, but the USB fastboot can…